La Cimbali espresso brewing group (M39, M39-GT, M34, M24, M28, M30, M31, M32) screw size
M6 · 29 mm long
Our records put La Cimbali espresso brewing group (M39, M39-GT, M34, M24, M28, M30, M31, M32) on M6 screws, 29 mm long.
It is listed for male M6 thread, 29mm long hex bolt that retains the portafilter coupling ring on the brewing group (part #593815000/593815010).
This entry is marked confirmed and comes from brooks-parts.com.
For reference, M6 is 6 mm across the threads at 1 mm pitch. The imperial size people confuse it with: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
La Cimbali espresso brewing group (M39, M39-GT, M34, M24, M28, M30, M31, M32) screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 29 mm | 1 mm | not stated | not stated | Male M6 thread, 29mm long hex bolt that retains the portafilter coupling ring on the brewing group (part #593815000/593815010) | Confirmed |
Fitment records and sources
Male M6 thread, 29mm long hex bolt that retains the portafilter coupling ring on the brewing group (part #593815000/593815010)
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- Unplug the appliance and discharge any capacitors before removing covers.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 29 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M6 heads take PH3 for Phillips and T30 for Torx, and a 5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M6
- UR cobot flange bolts are commonly sold/quoted as 'M6 bolts' but the required length depends on the tool thickness; UR's own guidance is bolt class M6-8.8 to ISO4762 without a fixed length, so length must be selected per adapter/tool stack-up, not assumed as a fixed mm value.
- Climbing bolt hangers and most ski bindings are M8 and up, outside this database's M1.2-M6 range.
More in Appliances & HVAC
Appliance door hingesAppliance handlesAstoria/CMA espresso solenoid group head (used in coffee kiosk equipment)Astoria/CMA espresso solenoid group head screwBerkel 330M Slicer cover fastenerBerkel 330M Slicer sharpener/guard mountingBezzera Giulia espresso machineBosch dishwasherCoffee machine control panelDaikin FTXS/CTXS Mini-split control board / cover screwDaikin FTXS/CTXS Mini-split indoor unit mounting / terminal cover screwDaikin FTXS/CTXS Mini-split indoor unit terminal cover / mounting plate screw
Browse all 62 in Appliances & HVAC →The same screw also fits
Devices whose records share a thread with La Cimbali espresso brewing group (M39, M39-GT, M34, M24, M28, M30, M31, M32), closest length match first.
- Adult e-scooters also M6 × 29 mm
- FJD 3D Excavator Guidance System (GNSS/IMU hardware) also M6 × 29 mm
- Electrolux Professional compact rack-type dishwasher also M6 × 29 mm
- Power wheelchair drive motor mounts also M6 × 29 mm
- Universal full-motion TV mount kits also M6 × 29 mm
- Yamaha F25 / T25 outboard motor also M6 × 29 mm
- Metal table leg bracket also M6 × 29 mm
- Weight machine adjustment brackets also M6 × 29 mm
Questions about La Cimbali espresso brewing group (M39, M39-GT, M34, M24, M28, M30, M31, M32) screws
- What size screw does La Cimbali espresso brewing group (M39, M39-GT, M34, M24, M28, M30, M31, M32) use?
- M6 × 29 mm for male M6 thread, 29mm long hex bolt that retains the portafilter coupling ring on the brewing group (part #593815000/593815010).
- How long are the screws in La Cimbali espresso brewing group (M39, M39-GT, M34, M24, M28, M30, M31, M32)?
- The record gives 29 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for La Cimbali espresso brewing group (M39, M39-GT, M34, M24, M28, M30, M31, M32)?
- The sources do not name the drive. For M6, Phillips heads normally take PH3 and Torx heads T30; socket heads take a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.