• Free shipping over $25

  • Free help & advice

  • Open 7 days a week

Lenovo ThinkPad T450 laptop screw size

M2 · 2 to 4 mm long

Lenovo ThinkPad T450 laptop takes M2 metric screws in lengths from 2 to 4 mm.

There are 3 separate fitment records for it, including flat-head/small-head/big-head nylon-coated variants used repeatedly across disassembly ste (M2), flat-head, nylon-coated screw (M2) and big-head, nylon-coated screw, quantity 4 (M2).

Head and drive, as the sources state them: flat / countersunk head.

3 of the 3 records are marked confirmed, drawn from 1 source (download.lenovo.com).

M2 means a 2 mm nominal diameter with a 0.4 mm thread pitch. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.

Lenovo ThinkPad T450 laptop screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

ThreadLengthPitchHeadDriveWhere it goesStatus
M23 mm0.4 mmFlat / countersunknot statedFlat-head/small-head/big-head nylon-coated variants used repeatedly across disassembly stepsthread-locking patchConfirmed
M22 mm0.4 mmFlat / countersunknot statedFlat-head, nylon-coated screwthread-locking patchConfirmed
M24 mm0.4 mmnot statednot statedBig-head, nylon-coated screw, quantity 4thread-locking patchConfirmed

Fitment records and sources

M23mmhigh

Flat-head/small-head/big-head nylon-coated variants used repeatedly across disassembly steps

pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6

M22mmhigh

Flat-head, nylon-coated screw

pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6

M24mmhigh

Big-head, nylon-coated screw, quantity 4

pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6

How to check the screw before you buy

  1. A screw that is even 1 mm too long in a laptop base can push into the keyboard, battery or a board trace, so match the length position by position.
  2. Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
  3. Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
  4. Length: the source describes a countersunk (flat) head, and those are measured overall, from the top of the head to the tip.
  5. The records span 2–4 mm, which means different positions take different lengths — match each hole to its own screw.
  6. Driver: the source does not name the drive. Standard M2 heads take PH0 for Phillips and T6 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
  7. Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.

Common mix-ups with M2

  • Packaging/labeling equipment manuals (e.g., cab print-and-apply applicators) mix M2 through M6 fasteners across a single machine for very different assemblies (sensors vs. frame vs. drive) — do not generalize one thread size to 'the machine' as a whole; cite the specific subassembly.
  • The standard M.2 SSD screw is M2 x 3mm, but some laptops and handhelds use non-standard lengths or head shapes.

Pitch gauge · Screw size finder · Torque guide

Buy these screws at TechSpare Warehouse

In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.

More in Laptops & PCs

Browse all 2799 in Laptops & PCs →

The same screw also fits

Devices whose records share a thread with Lenovo ThinkPad T450 laptop, closest length match first.

Questions about Lenovo ThinkPad T450 laptop screws

What size screw does Lenovo ThinkPad T450 laptop use?
M2 × 3 mm for flat-head/small-head/big-head nylon-coated variants used repeatedly across disassembly steps; M2 × 2 mm for flat-head, nylon-coated screw; M2 × 4 mm for big-head, nylon-coated screw, quantity 4.
How long are the screws in Lenovo ThinkPad T450 laptop?
The records range from 2 to 4 mm depending on the position, so match each screw to its own hole.
What is the thread pitch of an M2 screw?
0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
What screwdriver do I need for Lenovo ThinkPad T450 laptop?
The sources do not name the drive. For M2, Phillips heads normally take PH0 and Torx heads T6; socket heads take a 1.5 mm hex key.
Can I use an imperial screw instead of M2?
No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
Where can I buy replacement screws for Lenovo ThinkPad T450 laptop?
TechSpareWarehouse (our own store) lists M2 x 3mm, M2 x 2mm and M2 x 4mm, which match lengths in the records above.