Lenovo YOGA 920-13IKB screw size

Lenovo YOGA 920-13IKB screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

How to check the screw before you buy

1. Laptop covers and brackets often mix two or three lengths of the same thread, so lay the screws out in the order they came out (a magnetic mat or a sheet of paper with the hole pattern drawn on it works).
2. Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). This device also uses M2, so measure each screw rather than assuming they match.
3. Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
4. Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
5. The records span 1.8–3.5 mm, which means different positions take different lengths — match each hole to its own screw.
6. Driver: the source names a Phillips drive. For comparison, standard M1.6 heads take PH00 (Phillips) or T4–T5 (Torx), or a 1.5 mm hex key.
7. Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.

Pitch gauge · Screw size finder · Torque guide

More in Laptops & PCs

The same screw also fits

Devices whose records share a thread with Lenovo YOGA 920-13IKB, closest length match first.

• Dell Studio 1535 also M2 × 3 mm
• Lenovo ThinkPad T61 also M2 × 3 mm
• Dell Inspiron 15 7573 2-in-1 also M2 × 3 mm
• Lenovo ThinkPad R51e also M2 × 3 mm
• Dell Inspiron 16 5640 also M2 × 3.5 mm
• Lenovo LOQ 15ARP10E also M2 × 3.5 mm
• HP 241 G1 also M2 × 3 mm
• Dell Precision 5690 also M2 × 3 mm

Questions about Lenovo YOGA 920-13IKB screws

What size screw does Lenovo YOGA 920-13IKB use?

M1.6 × 2.4 mm for display (qty 8, black, Phillips); M2 × 1.8 mm for display (qty 12, black, Phillips); M2 × 1.8 mm for speaker (qty 4, black, Phillips); M2 × 3 mm for I/O board (qty 2, black, Phillips); M2 × 3 mm for heat sink (qty 1, black, Phillips); M2 × 3 mm for SSD (qty 1, black, Phillips); M2 × 3 mm for system board (qty 12, black, Phillips); M2 × 3 mm for wireless card (qty 1, black, Phillips); M2 × 3.5 mm for base cover (qty 10, silver, Torx).

How long are the screws in Lenovo YOGA 920-13IKB?

The records range from 1.8 to 3.5 mm depending on the position, so match each screw to its own hole.

What is the thread pitch of an M1.6 screw?

0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.

What screwdriver do I need for Lenovo YOGA 920-13IKB?

The source lists a Phillips and Torx drive. Standard M1.6 heads otherwise take PH00 (Phillips) or T4–T5 (Torx), or a 1.5 mm hex key.

Can I use an imperial screw instead of M1.6?

No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.

Where can I buy replacement screws for Lenovo YOGA 920-13IKB?

TechSpareWarehouse (our own store) lists M2 x 2mm and M2 x 3mm, which match lengths in the records above.