Makita 6095D cordless driver drill screw size
M4 / M5 · 12 to 35 mm long
If you are replacing a screw on Makita 6095D cordless driver drill, the thread is M4 and M5 in lengths from 12 to 35 mm.
There are 6 separate fitment records for it, including pan head screw, item 001 in official parts drawing (housing screw) (M4), pan head screw, item 002 in official parts drawing (housing screw) (M4) and six pan head screws (M4x22) plus two longer pan head screws (M4x35) close the housing (M4), plus 3 more in the table below.
Head and drive, as the sources state them: pan head.
6 of the 6 records are marked confirmed, drawn from 1 source (makita.ae).
M4 means a 4 mm nominal diameter with a 0.7 mm thread pitch. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
Makita 6095D cordless driver drill screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 22 mm | 0.7 mm | Pan head | not stated | Pan head screw, item 001 in official parts drawing (housing screw) | Confirmed |
| M4 | 35 mm | 0.7 mm | Pan head | not stated | Pan head screw, item 002 in official parts drawing (housing screw) | Confirmed |
| M4 | 22–35 mm | 0.7 mm | Pan head | not stated | Six pan head screws (M4x22) plus two longer pan head screws (M4x35) close the housing | Confirmed |
| M5 | 12 mm | 0.8 mm | Pan head | not stated | Pan head screw, item 006, secures change ring/cam plate assembly | Confirmed |
| M5 | 22 mm | 0.8 mm | Pan head | not stated | Pan head screw listed in official parts drawing | Confirmed |
| M5 | 12 mm | 0.8 mm | Pan head | not stated | Two pan head screws in the gear housing area | Confirmed |
Fitment records and sources
Pan head screw, item 001 in official parts drawing (housing screw)
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Pan head screw, item 002 in official parts drawing (housing screw)
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Six pan head screws (M4x22) plus two longer pan head screws (M4x35) close the housing
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Pan head screw, item 006, secures change ring/cam plate assembly
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
Pan head screw listed in official parts drawing
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
Two pan head screws in the gear housing area
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- Industrial parts lists usually give the full callout (thread, length, head, grade); match all four, not just the thread.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). This device also uses M5, so measure each screw rather than assuming they match.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: for pan head screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
- The records span 12–35 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4 / M5
- Grounding-lug screws on Siemens and Beckhoff gear (M4) are earth hardware, not structural mounting screws — don't reuse them to hold a module.
- US-made pinball machines (Williams/Bally/Stern) overwhelmingly use imperial UTS threads (#6-32, #8-32, #10-32); explicit metric threads only appear on newer/import components such as Jersey Jack Pinball's Hobbit Smaug assembly (M3).
- GoPro's mount thumbscrew is M5 x 0.8 — very close to imperial 10-32; a 10-32 will start to thread and then bind or strip.
- Rosemount and similar field instruments quote hex driver sizes in inches (e.g. 5/64 in) rather than a metric thread.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M4 x 25mm Black Wafer Head TV Stand Screws for Vizio V4K50M-0807, VQD50R-1007, VQP75C-84 & TCL 40S303, 43S303 – 8-Pack Replacement
$6.99Choose size -
M4 x 25mm Black Wafer Head Assembly Screws for xTool D1 Pro Laser Engraver – 10-Pack Replacement
$5.99Choose size -
M5 x 12mm Black Wafer Head Cut-off Saw Screws for STIHL TS400 Cut-off Saw (replaces IS-M5x12 9022 341 0960) – 10-Pack Replacement
$5.99Choose size -
M5 x 12mm Black Wafer Head Generator Cover Screws for Honda EM, EB, EG Generators & EU3200i (replaces 90102-Z21-000) – 10-Pack Replacement
$5.99Choose size
More in Industrial & Machinery
The same screw also fits
Devices whose records share a thread with Makita 6095D cordless driver drill, closest length match first.
- Juki MF-7923 / MF-7523 industrial machine also M4 × 25 mm
- Ryobi RY40001B 40V power head also M4 × 30 mm
- Pinball cabinet hardware (EU restorations) also M4 × 22 mm
- Yale Assure Lock Lever Touchscreen (YRL226) also M4 × 22 mm
- Makita TW004G cordless impact wrench also M4 × 25 mm
- ABB ACS580 motor terminal box / cable glands also M5 × 12 mm
- Machinery access panels also M5 × 12 mm
- Makita 1806B planer also M4 × 30 mm
Questions about Makita 6095D cordless driver drill screws
- What size screw does Makita 6095D cordless driver drill use?
- M4 × 22 mm for pan head screw, item 001 in official parts drawing (housing screw); M4 × 35 mm for pan head screw, item 002 in official parts drawing (housing screw); M4 × 22–35 mm for six pan head screws (M4x22) plus two longer pan head screws (M4x35) close the housing; M5 × 12 mm for pan head screw, item 006, secures change ring/cam plate assembly; M5 × 22 mm for pan head screw listed in official parts drawing; M5 × 12 mm for two pan head screws in the gear housing area.
- How long are the screws in Makita 6095D cordless driver drill?
- The records range from 12 to 35 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for Makita 6095D cordless driver drill?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.