Makita DHS680 165mm cordless circular saw screw size
M5 · 40 mm long
Our records put Makita DHS680 165mm cordless circular saw on M5 screws, 40 mm long.
The record covers pan head screw used with the tool hanger set.
Head and drive, as the source states them: pan head.
This entry is marked confirmed and comes from agrodirect.at.
M5 means a 5 mm nominal diameter with a 0.8 mm thread pitch. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing.
Makita DHS680 165mm cordless circular saw screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M5 | 40 mm | 0.8 mm | Pan head | not stated | Pan head screw used with the tool hanger set | Confirmed |
Fitment records and sources
Pan head screw used with the tool hanger set
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- Check the strength class stamped on the head (8.8, 10.9, A2-70) and replace like for like.
- Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: for pan head screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
- The record states 40 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M5 heads take PH2 for Phillips and T25 for Torx, and a 4 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M5 is about 4.0-6.0 N·m into metal threads and 1.5-2.5 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M5
- M5x0.8 is the de facto universal bike thread — confirm 0.8mm pitch before threading into carbon or alloy bosses.
More in Industrial & Machinery
ABB ACS580 motor terminal box / cable glandsABB ACS580 terminal hardware (frames R3-R5)ABB random-wound motor terminal boxes (ACS580 drive systems)Allen-Bradley ControlLogix 1756-A chassisAngle grinder gear housingBianchi / Nuova Simonelli / Rheavendors / Saeco vending machineCircular saw blade guard pivotContender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screwsCordless drill housing shellsCOSEL power supply terminal block (used in industrial/pump/water-treatment control panels)Datalogic DS2400 fixed-mount barcode readerDeWalt D51430 / D51431 pneumatic nailer
Browse all 113 in Industrial & Machinery →The same screw also fits
Devices whose records share a thread with Makita DHS680 165mm cordless circular saw, closest length match first.
- Makita 1806B planer also M5 × 40 mm
- Stihl 064 / 048 chainsaw and cut-off saw housing also M5 × 40 mm
- Makita 4100KB cutter also M5 × 40 mm
- Cordless drill housing shells also M5 × 40 mm
- Bullet CCTV camera housing also M5 × 40 mm
- Door lever through-bolts also M5 × 40 mm
- Voron 2.4 bed extrusions also M5 × 40 mm
- Prusa i3 MK3S/MK4 frame and Y-rod holders also M5 × 40 mm
Questions about Makita DHS680 165mm cordless circular saw screws
- What size screw does Makita DHS680 165mm cordless circular saw use?
- M5 × 40 mm for pan head screw used with the tool hanger set.
- How long are the screws in Makita DHS680 165mm cordless circular saw?
- The record gives 40 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M5 screw?
- 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
- What screwdriver do I need for Makita DHS680 165mm cordless circular saw?
- The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.
- Can I use an imperial screw instead of M5?
- No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.