Motorola CP125 business portable radio service manual fasteners screw size
M2.5 · 6 mm long
The screws used on Motorola CP125 business portable radio service manual fasteners are M2.5, 6 mm long.
The record covers motorola portable radio service manual documents chassis/battery-latch screws; Motorola's commercial portable radio disassembly procedures of this era specify M2.5 case screws in the parts/torque list.
This entry is marked likely and comes from manuals.repeater-builder.com.
M2.5 means a 2.5 mm nominal diameter with a 0.45 mm thread pitch. Imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in.
Motorola CP125 business portable radio service manual fasteners screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2.5 | 6 mm | 0.45 mm | not stated | not stated | Motorola portable radio service manual documents chassis/battery-latch screws; Motorola's commercial portable radio disassembly procedures of this era specify M2.5 case screws in the parts/torque list | Likely |
Fitment records and sources
Motorola portable radio service manual documents chassis/battery-latch screws; Motorola's commercial portable radio disassembly procedures of this era specify M2.5 case screws in the parts/torque list
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- Phone and wearable screws are tiny and often differ by fractions of a millimetre between positions; keep each one next to the hole it came from.
- Diameter: across the threads an M2.5 screw measures about 2.5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.45 mm from one thread crest to the next (22.22 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 6 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M2.5 heads take PH1 for Phillips and T8 for Torx, and a 2 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2.5 is about 45-70 N·cm into metal threads and 20-35 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2.5
- Dell/HP/Lenovo manuals often list screws only by torque or head shape, so community teardowns are needed for diameter.
- Commonly confused with imperial 4-40 screws in older medical equipment, but modern GE/Mindray devices explicitly list M2.5 metric threads.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2.5 x 6mm Laptop Motherboard Replacement Screws Wafer Head 10-Pack Black
$4.99 -
10x M2.5 x 6mm Phillips Screws for Lenovo ThinkPad X131e Chromebook LCD Hinge
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
-
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
More in Phones, Tablets & Wearables
The same screw also fits
Devices whose records share a thread with Motorola CP125 business portable radio service manual fasteners, closest length match first.
- Xbox Series X drive bay and PSU also M2.5 × 6 mm
- Extech 407732 sound level meter battery cover screw also M2.5 × 6 mm
- Lenovo ThinkPad E41-20 also M2.5 × 6 mm
- Lenovo V480c also M2.5 × 6 mm
- HP Pavilion TX1000 also M2.5 × 6 mm
- Lenovo IdeaPad Y480 also M2.5 × 6 mm
- Lenovo E4430 also M2.5 × 6 mm
- Lenovo ThinkPad P16 Gen 2 also M2.5 × 6 mm
Questions about Motorola CP125 business portable radio service manual fasteners screws
- What size screw does Motorola CP125 business portable radio service manual fasteners use?
- M2.5 × 6 mm for motorola portable radio service manual documents chassis/battery-latch screws; Motorola's commercial portable radio disassembly procedures of this era specify M2.5 case screws in the parts/torque list.
- How long are the screws in Motorola CP125 business portable radio service manual fasteners?
- The record gives 6 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M2.5 screw?
- 0.45 mm (coarse), which is the standard pitch for M2.5 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.05 mm and the normal clearance hole is 2.9 mm.
- What screwdriver do I need for Motorola CP125 business portable radio service manual fasteners?
- The sources do not name the drive. For M2.5, Phillips heads normally take PH1 and Torx heads T8; socket heads take a 2 mm hex key.
- Can I use an imperial screw instead of M2.5?
- No. Imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in. Use a true M2.5 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Motorola CP125 business portable radio service manual fasteners?
- TechSpareWarehouse (our own store) lists M2.5 x 6mm, which matches the length in the records above.