NBK SPE-MC PEEK micro pan head screws screw size
M1.2 / M1.4 / M1.6 · 1.5 to 6 mm long
If you are replacing a screw on NBK SPE-MC PEEK micro pan head screws, the thread is M1.2, M1.4 and M1.6 in lengths from 1.5 to 6 mm.
There are 3 separate fitment records for it, including plastic cross-recessed micro screws for precision instrument/sensor assembly offered in M1 (M1.2), non-magnetic PEEK micro screws in M1.4 for MEMS/sensor and precision instrument packaging (M1.4) and M1.6 PEEK micro pan head screws, 1.5-6mm lengths, for precision instrument and sensor asse (M1.6).
Head and drive, as the sources state them: pan head.
3 of the 3 records are marked confirmed, drawn from 1 source (nbk1560.com).
An M1.2 screw is 1.2 mm in diameter with a 0.25 mm pitch, tapped with a 0.95 mm drill; imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute.
NBK SPE-MC PEEK micro pan head screws screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.2 | 1.5–6 mm | 0.25 mm | not stated | not stated | Plastic cross-recessed micro screws for precision instrument/sensor assembly offered in M1.2 with 1.5-6mm lengths | Confirmed |
| M1.4 | 1.5–6 mm | 0.3 mm | not stated | not stated | Non-magnetic PEEK micro screws in M1.4 for MEMS/sensor and precision instrument packaging | Confirmed |
| M1.6 | 1.5–6 mm | 0.35 mm | Pan head | not stated | M1.6 PEEK micro pan head screws, 1.5-6mm lengths, for precision instrument and sensor assembly where metal screws are unsuitable | Confirmed |
Fitment records and sources
Plastic cross-recessed micro screws for precision instrument/sensor assembly offered in M1.2 with 1.5-6mm lengths
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
Non-magnetic PEEK micro screws in M1.4 for MEMS/sensor and precision instrument packaging
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
M1.6 PEEK micro pan head screws, 1.5-6mm lengths, for precision instrument and sensor assembly where metal screws are unsuitable
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
How to check the screw before you buy
- Industrial parts lists usually give the full callout (thread, length, head, grade); match all four, not just the thread.
- Diameter: across the threads an M1.2 screw measures about 1.2 mm with calipers (usually a hair under). This device also uses M1.4 / M1.6, so measure each screw rather than assuming they match.
- Pitch: 0.25 mm from one thread crest to the next (40 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: for pan head screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
- The records span 1.5–6 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.2 heads take PH000 / JIS 00 for Phillips and T1–T2 for Torx; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.2 is about 5-8 N·cm into metal threads and 3-5 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.2 / M1.4 / M1.6
- M1.2 and M1.4 look identical in an eyeglass repair kit — the wrong one strips soft acetate or metal hinges.
- Whoop drone M1.4 comes in steel, PEEK and RENY versions: plastic ones are for cameras, not structural frame use.
- Steam Deck (LCD) mixes M1.6 and M2 screws with near-identical heads at 3, 3.5, 4 and 4.5 mm — swapping them cross-threads the plastic. Match by the iFixit Screw ID guide.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.2 x 2mm Phillips Wafer Head Screw for Digital Camera & Micro Robotics - Pack of 50 Black
$4.99 -
M1.2 x 2mm Screws for FPV Drone Build Phillips Wafer Head 10-Pack
$4.99 -
M1.4 x 2mm Screws for Dell XPS 13 9340 Power Button Fingerprint 10-Pack Black
$4.99 -
M1.4 x 2mm Screws for Dell XPS 14 9440 Power Button – 10-Pack Black
$4.99
-
M1.6 x 3mm Screws Compatible with Dell XPS 13 9340 Keyboard 10-Pack Black
$4.99 -
M1.6 x 3mm Screws for Dell XPS 13 9340 System Board Replacement 10-Pack Black
$4.99
-
M1.6 Phillips Flat Head Carbon Steel Machine Screws (Multiple Lengths & Finishes)
$0.05Choose size -
M1.6 Phillips Flat Head Carbon Steel Machine Screws (Multiple Lengths & Finishes) | 50-Pack
From $4.99Choose size
More in Industrial & Machinery
The same screw also fits
Devices whose records share a thread with NBK SPE-MC PEEK micro pan head screws, closest length match first.
- Eyeglass/spectacle hinge screws also M1.4 × 2.5–6 mm
- Spectacle frame hinge screws (ISO 11381 standard) also M1.4 × 2–4 mm
- Dell G5 15 5587 also M1.6 × 2.2 mm
- Dell Precision 5760 also M1.6 × 4 mm
- Lenovo ThinkPad X220 Tablet also M1.6 × 3 mm
- Samsung Galaxy S23 USB-C daughterboard also M1.4 × 2–3 mm
- Lenovo ThinkPad X13s Gen 1 also M1.6 × 2.5 mm
- Microscope stage clip / condenser also M1.6 × 3–6 mm
Questions about NBK SPE-MC PEEK micro pan head screws screws
- What size screw does NBK SPE-MC PEEK micro pan head screws use?
- M1.2 × 1.5–6 mm for plastic cross-recessed micro screws for precision instrument/sensor assembly offered in M1.2 with 1.5-6mm lengths; M1.4 × 1.5–6 mm for non-magnetic PEEK micro screws in M1.4 for MEMS/sensor and precision instrument packaging; M1.6 × 1.5–6 mm for M1.6 PEEK micro pan head screws, 1.5-6mm lengths, for precision instrument and sensor assembly where metal screws are unsuitable.
- How long are the screws in NBK SPE-MC PEEK micro pan head screws?
- The records range from 1.5 to 6 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.2 screw?
- 0.25 mm (coarse), which is the standard pitch for M1.2 machine screws. The tap drill is 0.95 mm and the normal clearance hole is 1.4 mm.
- What screwdriver do I need for NBK SPE-MC PEEK micro pan head screws?
- The sources do not name the drive. For M1.2, Phillips heads normally take PH000 / JIS 00 and Torx heads T1–T2.
- Can I use an imperial screw instead of M1.2?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute. Use a true M1.2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for NBK SPE-MC PEEK micro pan head screws?
- TechSpareWarehouse (our own store) lists M1.2 x 2mm, M1.4 x 2mm and M1.6 x 3mm, which match lengths in the records above.