Segway-Ninebot Max Pro 2.2 e-scooter stem screw size
M5 · 12 mm long
If you are replacing a screw on Segway-Ninebot Max Pro 2.2 e-scooter stem, the thread is M5, 12 mm long.
Where it is used: M5 screw on the front side of the front tube, removed during stem replacement.
This entry is marked likely and comes from fleets.levyelectric.com.
For reference, M5 is 5 mm across the threads at 0.8 mm pitch. The imperial size people confuse it with: #10-32 (4.83 mm) — the other common rack thread; check before mixing.
Segway-Ninebot Max Pro 2.2 e-scooter stem screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M5 | 12 mm | 0.8 mm | not stated | not stated | M5 screw on the front side of the front tube, removed during stem replacement | Likely |
Fitment records and sources
M5 screw on the front side of the front tube, removed during stem replacement
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- On vehicles and bikes, use the original strength class and finish; outdoor hardware is usually stainless or coated to resist corrosion.
- Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 12 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M5 heads take PH2 for Phillips and T25 for Torx, and a 4 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M5 is about 4.0-6.0 N·m into metal threads and 1.5-2.5 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M5
- Truss and stage-light clamps use M8 or M10 bolts depending on tube diameter — larger than anything in this database, so don't substitute an M6.
- Wheelchair and mobility OEM screws specify an exact standard and strength class (ISO 7045 CL4.8, ISO 4762 CL12.9). Matching only the thread size can cause a failure under load.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M5 x 12mm Black Wafer Head Cut-off Saw Screws for STIHL TS400 Cut-off Saw (replaces IS-M5x12 9022 341 0960) – 10-Pack Replacement
$5.99Choose size -
M5 x 12mm Black Wafer Head Generator Cover Screws for Honda EM, EB, EG Generators & EU3200i (replaces 90102-Z21-000) – 10-Pack Replacement
$5.99Choose size
More in Vehicles, Marine & Mobility
ABB Terra DC Wallbox (3-phase UL)Adjustable Picatinny rail threaded insertAdult e-scootersAftermarket car stereo cageAirgun scope/rail mount replacement screwsAlpine Head UnitsAnalogis phono cartridge screw setArduino UNO / full-size Arduino boardsAudio MusiKraft cartridge mounting screw kitAudio MusiKraft cartridge/headshell mounting kitBar-end plug or bar-end shifterBerkel 330M Slicer carriage/guard fastener
Browse all 171 in Vehicles, Marine & Mobility →The same screw also fits
Devices whose records share a thread with Segway-Ninebot Max Pro 2.2 e-scooter stem, closest length match first.
- Kick scooter clamp and folding hardware also M5 × 12 mm
- Motorcycle fairing bolts also M5 × 12 mm
- SPD-SL / Look 3-hole cycling cleats also M5 × 12 mm
- Bicycle water bottle cage bolts also M5 × 12 mm
- Bicycle bottle cage boss also M5 × 12 mm
- Car door trim panel also M5 × 12 mm
- Mobility scooter battery box screw set also M5 × 12 mm
- Shimano BL-M785 hydraulic brake lever also M5 × 12 mm
Questions about Segway-Ninebot Max Pro 2.2 e-scooter stem screws
- What size screw does Segway-Ninebot Max Pro 2.2 e-scooter stem use?
- M5 × 12 mm for M5 screw on the front side of the front tube, removed during stem replacement.
- How long are the screws in Segway-Ninebot Max Pro 2.2 e-scooter stem?
- The record gives 12 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M5 screw?
- 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
- What screwdriver do I need for Segway-Ninebot Max Pro 2.2 e-scooter stem?
- The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.
- Can I use an imperial screw instead of M5?
- No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.