BMW Hexhead/K-Bike/Oilhead EnDuraLast charging-system component screw screw size
M6 · 22 mm long
Our records put BMW Hexhead/K-Bike/Oilhead EnDuraLast charging-system component screw on M6 screws, 22 mm long.
It is listed for phillips screw, BMW part 46 61 7 673 124, used with EnDuraLast alternator/charging electronics.
Head and drive, as the source states them: Phillips drive.
This entry is marked confirmed and comes from euromotoelectrics.com.
M6 means a 6 mm nominal diameter with a 1 mm thread pitch. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
BMW Hexhead/K-Bike/Oilhead EnDuraLast charging-system component screw screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 22 mm | 1 mm | not stated | Phillips | Phillips screw, BMW part 46 61 7 673 124, used with EnDuraLast alternator/charging electronics | Confirmed |
Fitment records and sources
Phillips screw, BMW part 46 61 7 673 124, used with EnDuraLast alternator/charging electronics
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- Rack and enclosure hardware mixes metric and imperial (#8-32, #10-32, #6-32), so confirm the thread before forcing a screw.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 22 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source names a Phillips drive. For comparison, standard M6 heads take PH3 (Phillips) or T30 (Torx), or a 5 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M6
- Rack hole threads vary: 10-32 and 12-24 are still common in US racks alongside M6 - check the rail before buying.
- 19-inch racks are not all metric: 10-32 and 12-24 UNC are still the norm in North America, with M6 the metric/square-hole cage-nut option.
More in Electronics, Racks & Enclosures
19-inch rack cage nut (light equipment)19-inch rack cage nut (metric square-hole rails)19-inch rack cage nut (mid size)19-inch rack cage nut and panel screw19-inch rack network and AV gear19-inch rack-mount audio/AV equipment19-inch server racks19in / 10in server rack cage nut and screw kit19in equipment rack (Kendall Howard cage nuts)19in rack cage nuts (alternate metric)19in rack cage nuts (metric)1U rack-mount PDU (American Denki)
Browse all 357 in Electronics, Racks & Enclosures →The same screw also fits
Devices whose records share a thread with BMW Hexhead/K-Bike/Oilhead EnDuraLast charging-system component screw, closest length match first.
- Weight machine adjustment brackets also M6 × 22 mm
- Industrial machinery also M6 × 22 mm
- Rad Power Bikes RadMini 4 also M6 × 22 mm
- FJD 3D Excavator Guidance System (GNSS/IMU hardware) also M6 × 22 mm
- Yamaha F25 / T25 outboard motor also M6 × 22 mm
- Electrolux Professional compact rack-type dishwasher also M6 × 22 mm
- Power wheelchair drive motor mounts also M6 × 22 mm
- Wurth Elektronik WA-SSTIE steel spacer stud also M6 × 22 mm
Questions about BMW Hexhead/K-Bike/Oilhead EnDuraLast charging-system component screw screws
- What size screw does BMW Hexhead/K-Bike/Oilhead EnDuraLast charging-system component screw use?
- M6 × 22 mm for phillips screw, BMW part 46 61 7 673 124, used with EnDuraLast alternator/charging electronics.
- How long are the screws in BMW Hexhead/K-Bike/Oilhead EnDuraLast charging-system component screw?
- The record gives 22 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for BMW Hexhead/K-Bike/Oilhead EnDuraLast charging-system component screw?
- The source lists a Phillips drive. Standard M6 heads otherwise take PH3 (Phillips) or T30 (Torx), or a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.