cab XD4T industrial label printer screw size
M2 / M3 / M4 · 4 to 16 mm long
If you are replacing a screw on cab XD4T industrial label printer, the thread is M2, M3 and M4 in lengths from 4 to 16 mm.
There are 6 separate fitment records for it, including DIN 7985 pan head screw PN 5902457.001 (M2), DIN 912 socket cap screws PN 5902010.001 / 5902007.001 (M3) and screw PN 5969326.001 (M4), plus 3 more in the table below.
Head and drive, as the sources state them: pan, socket cap, flat / countersunk and set screw (headless) heads and Hex socket (Allen) drive.
6 of the 6 records are marked confirmed, drawn from 1 source (cab.de).
M2 means a 2 mm nominal diameter with a 0.4 mm thread pitch. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable.
cab XD4T industrial label printer screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2 | 10 mm | 0.4 mm | Pan head | not stated | DIN 7985 pan head screw PN 5902457.001 | Confirmed |
| M3 | 6–10 mm | 0.5 mm | Socket cap | Hex socket (Allen) | DIN 912 socket cap screws PN 5902010.001 / 5902007.001 | Confirmed |
| M4 | 10 mm | 0.7 mm | not stated | not stated | screw PN 5969326.001 | Confirmed |
| M4 | 8 mm | 0.7 mm | Flat / countersunk | not stated | DIN 7991 countersunk screw PN 5902573.001 | Confirmed |
| M4 | 4 mm | 0.7 mm | Set screw (headless) | not stated | DIN 916 set screw PN 5904511.001 | Confirmed |
| M4 | 16 mm | 0.7 mm | Socket cap | not stated | DIN 7984 low head cap screw PN 5902572.001 | Confirmed |
Fitment records and sources
DIN 7985 pan head screw PN 5902457.001
pitch 0.4 mm · tap 1.6 mm · clearance 2.4 mm · PH0 / Torx T6
DIN 912 socket cap screws PN 5902010.001 / 5902007.001
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
screw PN 5969326.001
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
DIN 7991 countersunk screw PN 5902573.001
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
DIN 916 set screw PN 5904511.001
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
DIN 7984 low head cap screw PN 5902572.001
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
How to check the screw before you buy
- For medical and lab equipment, use the manufacturer's replacement part where one is specified; the thread size here helps identify it, not certify it.
- Diameter: across the threads an M2 screw measures about 2 mm with calipers (usually a hair under). This device also uses M3 / M4, so measure each screw rather than assuming they match.
- Pitch: 0.4 mm from one thread crest to the next (25 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: the source describes a countersunk (flat) head, and those are measured overall, from the top of the head to the tip.
- The records span 4–16 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source names a Hex socket (Allen) drive. For comparison, standard M2 heads take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2 is about 25-40 N·cm into metal threads and 12-20 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2 / M3 / M4
- Tamiya Mini 4WD parts are labelled plainly as '2mm' rather than M2; resellers add the M2 label themselves.
- Label printer parts lists write M3*6 with an asterisk; that is still a true ISO M3 x 6mm machine screw.
- M4 and 6-32 UNC share a nominal diameter with different pitch — a classic cross-thread in US-market kits.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M3 x 6mm Replacement Screws for XLR Audio Connectors Phillips Wafer Head 50-Pack
$4.99 -
M3 x 6mm Phillips Wafer Head Carbon Steel Machine Screws for XLR Audio Connectors | 50-Pack (Black)
$4.99
-
M3 x 8mm Screws for Leather Spike Attachments Guitar Straps 10-Pack
$4.99 -
M3 x 8mm Phillips Wafer Head Screw for SLA Resin 3D Printer VAT Film - Single Replacement Black
$0.10 each · min. 50
-
M3 x 10mm Phillips Wafer Head Screw for Sim Racing Wheel Paddle Shifter - Single Replacement Black
$0.10 each · min. 50
-
M3 x 10mm Phillips Wafer Head Screw for RC Car/Truck Chassis Mount - Single Replacement Black
$0.10 each · min. 50
-
M3 x 6mm Phillips Wafer Head Screw for 3D Printer Frame Assembly - Single Replacement Black
$0.10 each · min. 50
-
M3 x 6mm Phillips Wafer Head Screw for Boutique Guitar Pedal Enclosure - Single Replacement Black
$0.10 each · min. 50
More in Medical & Laboratory
The same screw also fits
Devices whose records share a thread with cab XD4T industrial label printer, closest length match first.
- TSC MH241 industrial label printer also M4 × 10 mm
- Takara Belmont PRO III 047 dental chair also M2 × 10 mm
- Kendro / Sorvall Legend T and Multifuge 3S/3L centrifuge also M3 × 8 mm
- ResMed S9 Elite CPAP chassis also M3 × 8–10 mm
- ResMed VPAP / S8 service hardware also M3 × 6–10 mm
- TSC TTP-2610MT / TTP-368MT industrial barcode printer also M3 × 6 mm
- Elo self-service EMV cradle kit for Wallaby Pro stands (Verifone P400 compatible) also M4 × 8 mm
- BMC RESmart CPAP machine also M3 × 10 mm
Questions about cab XD4T industrial label printer screws
- What size screw does cab XD4T industrial label printer use?
- M2 × 10 mm for DIN 7985 pan head screw PN 5902457.001; M3 × 6–10 mm for DIN 912 socket cap screws PN 5902010.001 / 5902007.001; M4 × 10 mm for screw PN 5969326.001; M4 × 8 mm for DIN 7991 countersunk screw PN 5902573.001; M4 × 4 mm for DIN 916 set screw PN 5904511.001; M4 × 16 mm for DIN 7984 low head cap screw PN 5902572.001.
- How long are the screws in cab XD4T industrial label printer?
- The records range from 4 to 16 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2 screw?
- 0.4 mm (coarse), which is the standard pitch for M2 machine screws; a 0.25 mm fine pitch exists but is uncommon. The tap drill is 1.6 mm and the normal clearance hole is 2.4 mm.
- What screwdriver do I need for cab XD4T industrial label printer?
- The source lists a Hex socket (Allen) drive. Standard M2 heads otherwise take PH0 (Phillips) or T6 (Torx), or a 1.5 mm hex key.
- Can I use an imperial screw instead of M2?
- No. Imperial look-alike: #2-56 UNC (2.18 mm) is close but not interchangeable. Use a true M2 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for cab XD4T industrial label printer?
- TechSpareWarehouse (our own store) lists M3 x 6mm, M3 x 8mm and M3 x 10mm, which match lengths in the records above.