TSC TTP-2610MT / TTP-368MT industrial barcode printer screw size
M3 · 6 mm long
Our records put TSC TTP-2610MT / TTP-368MT industrial barcode printer on M3 screws, 6 mm long.
It is listed for wiFi module fixed with machine screw M3*6 button head screws, tightening torque 5 kgf.cm.
Head and drive, as the source states them: button head.
This entry is marked confirmed and comes from tsc-drucker.com.
For reference, M3 is 3 mm across the threads at 0.5 mm pitch. The imperial size people confuse it with: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3.
TSC TTP-2610MT / TTP-368MT industrial barcode printer screw specifications
One row per fitment record. Head, drive and torque are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Torque | Where it goes | Status |
|---|---|---|---|---|---|---|---|
| M3 | 6 mm | 0.5 mm | Button head | not stated | 5 kgf.cm | WiFi module fixed with machine screw M3*6 button head screws, tightening torque 5 kgf.cm | Confirmed |
Fitment records and sources
WiFi module fixed with machine screw M3*6 button head screws, tightening torque 5 kgf.cm
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
How to check the screw before you buy
- Keep material and finish the same as the original (often stainless) on equipment that is cleaned or sterilised.
- Diameter: across the threads an M3 screw measures about 3 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.5 mm from one thread crest to the next (20 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: for button head screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
- The record states 6 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M3 heads take PH1 for Phillips and T10 for Torx, and a 2.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
Common mix-ups with M3
- Terminal-block clamp screws have manufacturer-specific torque values — over-tightening cracks the block or crushes the wire.
- Label printer parts lists write M3*6 with an asterisk; that is still a true ISO M3 x 6mm machine screw.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M3 x 6mm Replacement Screws for XLR Audio Connectors Phillips Wafer Head 50-Pack
$4.99 -
M3 x 6mm Phillips Wafer Head Carbon Steel Machine Screws for XLR Audio Connectors | 50-Pack (Black)
$4.99
-
M3 x 6mm Phillips Wafer Head Screw for 3D Printer Frame Assembly - Single Replacement Black
$0.10 each · min. 50
-
M3 x 6mm Phillips Wafer Head Screw for Boutique Guitar Pedal Enclosure - Single Replacement Black
$0.10 each · min. 50
More in Medical & Laboratory
Agilent 1100 LC/MSD mass spectrometerAgilent 8453 UV-Visible spectrophotometerAlaris 8110/8120 infusion pumpBehind-the-ear hearing aid shellBelmont Eurus S6 Dental UnitBHI Implants Rosen screwBicycle SPD-SL / SPD cleat fixing boltsBien-Air Dental HandpiecesBioHorizons CONELOG Dental ImplantsBlind-tapped DN16CF ConFlat vacuum flange (metric)BMC RESmart CPAP machineBredent dental prosthetic screw
Browse all 92 in Medical & Laboratory →The same screw also fits
Devices whose records share a thread with TSC TTP-2610MT / TTP-368MT industrial barcode printer, closest length match first.
- cab XD4T industrial label printer also M3 × 6 mm
- ResMed VPAP / S8 service hardware also M3 × 6 mm
- Philips IntelliVue MP80/MP90 small parts kit M8010-64001 also M3 × 6 mm
- Fisherbrand microplate clamp screw (lab automation) also M3 × 6 mm
- Surgical / veterinary instrument handles also M3 × 6 mm
- TSC MH241 / MH341 / MH641 industrial label printer also M3 × 6 mm
- Mindray VS-900 Vital Signs Monitor also M3 × 6 mm
- Pinball playfield insert hardware (metric) also M3 × 6 mm
Questions about TSC TTP-2610MT / TTP-368MT industrial barcode printer screws
- What size screw does TSC TTP-2610MT / TTP-368MT industrial barcode printer use?
- M3 × 6 mm for wiFi module fixed with machine screw M3*6 button head screws, tightening torque 5 kgf.cm.
- How long are the screws in TSC TTP-2610MT / TTP-368MT industrial barcode printer?
- The record gives 6 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M3 screw?
- 0.5 mm (coarse), which is the standard pitch for M3 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.5 mm and the normal clearance hole is 3.4 mm.
- What screwdriver do I need for TSC TTP-2610MT / TTP-368MT industrial barcode printer?
- The sources do not name the drive. For M3, Phillips heads normally take PH1 and Torx heads T10; socket heads take a 2.5 mm hex key.
- Can I use an imperial screw instead of M3?
- No. Imperial look-alike: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3. Use a true M3 screw so it does not cross-thread or strip the hole.
- How tight should the M3 screw on TSC TTP-2610MT / TTP-368MT industrial barcode printer be?
- The source gives 5 kgf.cm for wiFi module fixed with machine screw M3*6 button head screws, tightening torque 5 kgf.cm.
- Where can I buy replacement screws for TSC TTP-2610MT / TTP-368MT industrial barcode printer?
- TechSpareWarehouse (our own store) lists M3 x 6mm, which matches the length in the records above.