Dell XPS 13 9360 / 9340 screw size
M1.6 · 1.5 to 3 mm long
Dell XPS 13 9360 / 9340 takes M1.6 metric screws in lengths from 1.5 to 3 mm.
Where it is used: internal chassis screws listed in the official service-manual screw list.
This entry is marked confirmed and comes from dell.com.
For reference, M1.6 is 1.6 mm across the threads at 0.35 mm pitch. The imperial size people confuse it with: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent.
Dell XPS 13 9360 / 9340 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.6 | 1.5–3 mm | 0.35 mm | not stated | not stated | internal chassis screws listed in the official service-manual screw list | Confirmed |
Fitment records and sources
internal chassis screws listed in the official service-manual screw list
pitch 0.35 mm · tap 1.25 mm · clearance 1.8 mm · PH00 / Torx T4–T5
How to check the screw before you buy
- If several screws hold the same part, check that they are all the same length before assuming they are.
- Diameter: across the threads an M1.6 screw measures about 1.6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.35 mm from one thread crest to the next (28.57 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 1.5–3 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M1.6 heads take PH00 for Phillips and T4–T5 for Torx, and a 1.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.6 is about 12-20 N·cm into metal threads and 6-10 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.6
- M1.6 is the most common laptop-internal micro screw after M2 — Dell XPS keyboards specifically call out M1.6 x 1.5mm, and generic M2 substitutes strip the bracket.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.6 x 3mm Screws Compatible with Dell XPS 13 9340 Keyboard 10-Pack Black
$4.99 -
M1.6 x 3mm Screws for Dell XPS 13 9340 System Board Replacement 10-Pack Black
$4.99
-
ASUS ROG Strix G15 G513R Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size -
ASUS ROG Strix G17 G713 Replacement Screws Sold Individually – M1.6 x 3mm, M2 x 2.5mm, M2 x 3mm, M2.5 x 6mm Phillips Wafer Head, Black
$0.10Choose size
-
M1.6 x 2mm Black Wafer Head Keyboard & Speaker Screws for HP ZBook Fury G1i 18 – 70-Pack Replacement
$7.99Choose size -
M1.6 x 2mm Black Wafer Head M.2 2230 SSD Screws for Alienware m15 R1 & Dell Inspiron 15 5502 – 10-Pack Replacement
$4.99Choose size
More in Other Equipment
2020 aluminium extrusion T-nutsAcer Aspire / SwiftAllen-Bradley PowerFlex 520-series mounting adapter plateAllen-Bradley PowerFlex 750-seriesAllen-Bradley PowerFlex 750-series I/O shield terminationAllen-Bradley PowerFlex 755 IP00 control podAmiga 500 rear/front case screws (Retro32 replacement set)Arduino Uno / MegaASUS / MSI / Gigabyte / ASRock motherboardsBackscatter FLIP3.1 underwater filter frame screws (2x)Backscatter FLIP3.1 underwater flip-frame retaining screwBosch Rexroth swivel-in T-slot nut, slot 8
Browse all 125 in Other Equipment →The same screw also fits
Devices whose records share a thread with Dell XPS 13 9360 / 9340, closest length match first.
- PW-Sat2 CubeSat fastener bill of materials also M1.6 × 3 mm
- HP Spectre x360 16 inch 2-in-1 also M1.6 × 2 mm
- Dell Vostro 13 5320 also M1.6 × 2 mm
- Dell Latitude 9520 also M1.6 × 1.5 mm
- HP ProBook 455 G8 also M1.6 × 2 mm
- Dell Precision 5530 also M1.6 × 1.5 mm
- HP ProBook 4 G1iR 16 inch also M1.6 × 2 mm
- Lenovo 300e Yoga Chromebook Gen 4 also M1.6 × 1.7 mm
Questions about Dell XPS 13 9360 / 9340 screws
- What size screw does Dell XPS 13 9360 / 9340 use?
- M1.6 × 1.5–3 mm for internal chassis screws listed in the official service-manual screw list.
- How long are the screws in Dell XPS 13 9360 / 9340?
- The records range from 1.5 to 3 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M1.6 screw?
- 0.35 mm (coarse), which is the standard pitch for M1.6 machine screws; a 0.2 mm fine pitch exists but is uncommon. The tap drill is 1.25 mm and the normal clearance hole is 1.8 mm.
- What screwdriver do I need for Dell XPS 13 9360 / 9340?
- The sources do not name the drive. For M1.6, Phillips heads normally take PH00 and Torx heads T4–T5; socket heads take a 1.5 mm hex key.
- Can I use an imperial screw instead of M1.6?
- No. Imperial look-alike: #1-72 UNF (1.85 mm) is larger; there is no true imperial equivalent. Use a true M1.6 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Dell XPS 13 9360 / 9340?
- TechSpareWarehouse (our own store) lists M1.6 x 3mm, which matches the length in the records above.