DJI Mini 2 gimbal camera arm screws screw size
M1.4 · 2.5 mm long
DJI Mini 2 gimbal camera arm screws takes M1.4 metric screws, 2.5 mm long.
The record covers iFixit teardown guide for gimbal camera replacement on DJI Mini 2 involves multiple very small fasteners; DJI's published spare-part gimbal arm screws for Mini-series drones are catalogued at M1.4 metric thread by third-party parts suppliers.
This entry is marked likely and comes from ifixit.com.
For reference, M1.4 is 1.4 mm across the threads at 0.3 mm pitch. The imperial size people confuse it with: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix.
DJI Mini 2 gimbal camera arm screws screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.4 | 2.5 mm | 0.3 mm | not stated | not stated | iFixit teardown guide for gimbal camera replacement on DJI Mini 2 involves multiple very small fasteners; DJI's published spare-part gimbal arm screws for Mini-series drones are catalogued at M1.4 metric thread by third-party parts suppliers | Likely |
Fitment records and sources
iFixit teardown guide for gimbal camera replacement on DJI Mini 2 involves multiple very small fasteners; DJI's published spare-part gimbal arm screws for Mini-series drones are catalogued at M1.4 metric thread by third-party parts suppliers
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
How to check the screw before you buy
- Do not confuse metric mounting screws with the 1/4-20 or 3/8-16 tripod threads that cameras and clamps also carry.
- Diameter: across the threads an M1.4 screw measures about 1.4 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.3 mm from one thread crest to the next (33.33 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 2.5 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M1.4 heads take PH000 / PH00 for Phillips and T2–T3 for Torx, and a 1.3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.4 is about 8-12 N·cm into metal threads and 4-7 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.4
- iPhone-series OEM screws use both 'Main Screw' and 'Super Screw' names for M1.4 fasteners with different lengths per model/position — always match by dimensional code (L x D x T), not just model name.
- Eyewear screws are named thread x shaft x length, a different convention from ISO metric naming — easy to order wrong.
More in Cameras & Optics
The same screw also fits
Devices whose records share a thread with DJI Mini 2 gimbal camera arm screws, closest length match first.
- Compact & action cameras also M1.4 × 2.5 mm
- Oakley O Matter / steel frame hinge also M1.4 × 2.5 mm
- Eyeglass hinge screw (the most common size) also M1.4 × 2.5 mm
- Behind-the-ear hearing aid shell also M1.4 × 2.5 mm
- LG smartphones also M1.4 × 2.5 mm
- Google Pixel phones also M1.4 × 2.5 mm
- Sony PMW-EX1R camcorder also M1.4 × 2.5 mm
- Samsung Galaxy S23+ internal shields also M1.4 × 2.5 mm
Questions about DJI Mini 2 gimbal camera arm screws screws
- What size screw does DJI Mini 2 gimbal camera arm screws use?
- M1.4 × 2.5 mm for iFixit teardown guide for gimbal camera replacement on DJI Mini 2 involves multiple very small fasteners; DJI's published spare-part gimbal arm screws for Mini-series drones are catalogued at M1.4 metric thread by third-party parts suppliers.
- How long are the screws in DJI Mini 2 gimbal camera arm screws?
- The record gives 2.5 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M1.4 screw?
- 0.3 mm (coarse), which is the standard pitch for M1.4 machine screws. The tap drill is 1.1 mm and the normal clearance hole is 1.6 mm.
- What screwdriver do I need for DJI Mini 2 gimbal camera arm screws?
- The sources do not name the drive. For M1.4, Phillips heads normally take PH000 / PH00 and Torx heads T2–T3; socket heads take a 1.3 mm hex key.
- Can I use an imperial screw instead of M1.4?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix. Use a true M1.4 screw so it does not cross-thread or strip the hole.