Drum tension rod screw size
M5 · 25 to 50 mm long
If you are replacing a screw on Drum tension rod, the thread is M5 in lengths from 25 to 50 mm.
The record covers tensions the drum head into the lug casings.
This entry is marked reported and comes from alibaba.com.
An M5 screw is 5 mm in diameter with a 0.8 mm pitch, tapped with a 4.2 mm drill; imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing.
Drum tension rod screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M5 | 25–50 mm | 0.8 mm | not stated | not stated | tensions the drum head into the lug casings | Reported |
Fitment records and sources
tensions the drum head into the lug casings
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- Instrument and audio hardware often threads into wood or thin metal; a screw that is too long can poke through a finished surface.
- Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 25–50 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M5 heads take PH2 for Phillips and T25 for Torx, and a 4 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M5 is about 4.0-6.0 N·m into metal threads and 1.5-2.5 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M5
- Drum tension rod thread (M5) is distinct from the rod's overall diameter/length naming used by drum brands, causing confusion when ordering replacements by 'size' alone.
- Truss and stage-light clamps use M8 or M10 bolts depending on tube diameter — larger than anything in this database, so don't substitute an M6.
More in Audio, Music & Stage
Accordion reed blocksAllparts metric bridge length screwsARRI Mini Follow Focus MFF-2 / related follow-focus hardwareBoss compact guitar pedal battery doorCymbal stand / hi-hat wing nutCymbal stand top wing nutCymbal stand wing nutDrum hardware wing bolt / memory lockDrum tension rod / lug mounting screwDuratruss Mini 360 F14 10kg truss clampFender Standard Series bass bridgeFender/Squier import Stratocaster & Jazzmaster bridge
Browse all 48 in Audio, Music & Stage →The same screw also fits
Devices whose records share a thread with Drum tension rod, closest length match first.
- QSC K12 loudspeaker yoke spacer also M5 × 25 mm
- Drum tension rod / lug mounting screw also M5 × 50 mm
- Atdec Telehook TH-2250-VF display wall mount also M5 × 25–30 mm
- Shelving brackets also M5 × 25 mm
- LG 42LK550 also M5 × 35 mm
- LG 47LW5600 also M5 × 35 mm
- LG 47LK550 also M5 × 35 mm
- LG 32LW5700 also M5 × 35 mm
Questions about Drum tension rod screws
- What size screw does Drum tension rod use?
- M5 × 25–50 mm for tensions the drum head into the lug casings.
- How long are the screws in Drum tension rod?
- The records range from 25 to 50 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M5 screw?
- 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
- What screwdriver do I need for Drum tension rod?
- The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.
- Can I use an imperial screw instead of M5?
- No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.