Eurodib LB Series Spiral Mixer (bakery dough mixer) electrical control box screw size
M4 · 12 mm long
If you are replacing a screw on Eurodib LB Series Spiral Mixer (bakery dough mixer) electrical control box, the thread is M4, 12 mm long.
The record covers eurodib LB Series Spiral Mixer Operation Manual explicitly calls out M4 screws for securing the electrical control box cover and internal terminal blocks.
This entry is marked likely and comes from eurodibproductimages.blob.core.windows.net.
M4 means a 4 mm nominal diameter with a 0.7 mm thread pitch. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
Eurodib LB Series Spiral Mixer (bakery dough mixer) electrical control box screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 12 mm | 0.7 mm | not stated | not stated | Eurodib LB Series Spiral Mixer Operation Manual explicitly calls out M4 screws for securing the electrical control box cover and internal terminal blocks | Likely |
Fitment records and sources
Eurodib LB Series Spiral Mixer Operation Manual explicitly calls out M4 screws for securing the electrical control box cover and internal terminal blocks
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
How to check the screw before you buy
- Industrial parts lists usually give the full callout (thread, length, head, grade); match all four, not just the thread.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 12 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4
- M4 and 6-32 UNC share a nominal diameter with different pitch — a classic cross-thread in US-market kits.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
More in Industrial & Machinery
The same screw also fits
Devices whose records share a thread with Eurodib LB Series Spiral Mixer (bakery dough mixer) electrical control box, closest length match first.
- Juki MF-7900 industrial coverstitch machine also M4 × 12 mm
- Power tool battery pack shell also M4 × 12 mm
- Pinball cabinet hardware (EU restorations) also M4 × 12 mm
- Rhea Vendors Luce Publico vending machine also M4 × 12 mm
- Circular saw blade guard pivot also M4 × 12 mm
- Electronics enclosures also M4 × 12 mm
- LG 55LW9500 also M4 × 12 mm
- UniFi rack shelf and tray hardware also M4 × 12 mm
Questions about Eurodib LB Series Spiral Mixer (bakery dough mixer) electrical control box screws
- What size screw does Eurodib LB Series Spiral Mixer (bakery dough mixer) electrical control box use?
- M4 × 12 mm for eurodib LB Series Spiral Mixer Operation Manual explicitly calls out M4 screws for securing the electrical control box cover and internal terminal blocks.
- How long are the screws in Eurodib LB Series Spiral Mixer (bakery dough mixer) electrical control box?
- The record gives 12 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for Eurodib LB Series Spiral Mixer (bakery dough mixer) electrical control box?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.