NCR ATM repairing components screw screw size
M4 · 10 mm long
Our records put NCR ATM repairing components screw on M4 screws, 10 mm long.
Where it is used: OEM part listing: 'NCR ATM Parts Repairing Components Screw M4 X 10 M/C Combi 009-0006593'.
This entry is marked confirmed and comes from atm-machineparts.com.
For reference, M4 is 4 mm across the threads at 0.7 mm pitch. The imperial size people confuse it with: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
NCR ATM repairing components screw screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 10 mm | 0.7 mm | not stated | not stated | OEM part listing: 'NCR ATM Parts Repairing Components Screw M4 X 10 M/C Combi 009-0006593' | Confirmed |
Fitment records and sources
OEM part listing: 'NCR ATM Parts Repairing Components Screw M4 X 10 M/C Combi 009-0006593'
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
How to check the screw before you buy
- Check whether the mount uses a VESA pattern or a vendor bracket before buying screws.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 10 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4
- US-made pinball machines (Williams/Bally/Stern) overwhelmingly use imperial UTS threads (#6-32, #8-32, #10-32); explicit metric threads only appear on newer/import components such as Jersey Jack Pinball's Hobbit Smaug assembly (M3).
- M4 and 6-32 UNC share a nominal diameter with different pitch — a classic cross-thread in US-market kits.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
More in Printers, POS & Office
The same screw also fits
Devices whose records share a thread with NCR ATM repairing components screw, closest length match first.
- HP Color LaserJet 8500 2000-sheet input unit also M4 × 10 mm
- Diebold Opteva ATM cassette screw also M4 × 10 mm
- Grindex Mega Inox submersible pump (water treatment/wastewater pump) terminal box also M4 × 10 mm
- HP Color LaserJet 8500 / 8500N / 8500DN also M4 × 10 mm
- COSEL power supply terminal block also M4 × 10 mm
- HP LaserJet 9000/9040/9050 series printer also M4 × 10 mm
- NCR 7360 self-checkout Bagwell Upgrade Kit (K112/K114/K124) also M4 × 10 mm
- Avid CNC Laser Kit also M4 × 10 mm
Questions about NCR ATM repairing components screw screws
- What size screw does NCR ATM repairing components screw use?
- M4 × 10 mm for OEM part listing: 'NCR ATM Parts Repairing Components Screw M4 X 10 M/C Combi 009-0006593'.
- How long are the screws in NCR ATM repairing components screw?
- The record gives 10 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for NCR ATM repairing components screw?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.