How long are the screws in NCR Personas cash dispenser screw?

The record gives 10 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.

What is the thread pitch of an M5 screw?

0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.

What screwdriver do I need for NCR Personas cash dispenser screw?

The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.

Can I use an imperial screw instead of M5?

No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.

NCR Personas cash dispenser screw screw size

M5 · 10 mm long

NCR Personas cash dispenser screw takes M5 metric screws, 10 mm long.

The record covers M5 x 10mm pan-head screw in the NCR Personas dispenser assembly.

Head and drive, as the source states them: pan head.

This entry is marked reported and comes from wpc-board.com.

For reference, M5 is 5 mm across the threads at 0.8 mm pitch. The imperial size people confuse it with: #10-32 (4.83 mm) — the other common rack thread; check before mixing.

NCR Personas cash dispenser screw screw specifications

One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.

Thread	Length	Pitch	Head	Drive	Where it goes	Status
M5	10 mm	0.8 mm	Pan head	not stated	M5 x 10mm pan-head screw in the NCR Personas dispenser assembly	Reported

Fitment records and sources

M510mmreported

M5 x 10mm pan-head screw in the NCR Personas dispenser assembly

pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25

Source

How to check the screw before you buy

Check whether the mount uses a VESA pattern or a vendor bracket before buying screws.
Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
Length: for pan head screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
The record states 10 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
Driver: the source does not name the drive. Standard M5 heads take PH2 for Phillips and T25 for Torx, and a 4 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
Tightening: no device-specific torque is published in these records. The site's general figure for M5 is about 4.0-6.0 N·m into metal threads and 1.5-2.5 N·m into plastic bosses; snug it up and stop.

Common mix-ups with M5

M5x0.8 is the de facto universal bike thread — confirm 0.8mm pitch before threading into carbon or alloy bosses.

Pitch gauge · Screw size finder · Torque guide

Buy these screws at TechSpare Warehouse

In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.

More in Printers, POS & Office

Arca-Swiss / GoPro DIY adapters Bixolon SRP-B300II POS receipt printer Brother DCP-8110D laser printer Brother HL-2170W laser printer Brother MFC-8950DW laser printer Coin validator / hopper front plate Coin-door / vending coin mech holder thumb screw COSEL power supply terminal block Diebold Nixdorf ATM (PN 49221808000F-26)Diebold Nixdorf DN100 ATM Diebold Nixdorf DN100 nylon screw Diebold Opteva ATM cassette screw

Browse all 58 in Printers, POS & Office →

The same screw also fits

Devices whose records share a thread with NCR Personas cash dispenser screw, closest length match first.

Johnson Controls PENN VFD68 Variable Frequency Drive higher-power terminal block also M5 × 10 mm
Rexel S16 paper shredder also M5 × 10 mm
Drum tension rod / lug screw also M5 × 10 mm
Berkel 330M Slicer carriage/guard fastener also M5 × 10 mm
Bicycle bottle cage boss also M5 × 10 mm
HP Pavilion 5500 also M5 × 10 mm
M VESA Digital Signage Wallmount also M5 × 10 mm
2020/2040 extrusion end tap also M5 × 10 mm

Questions about NCR Personas cash dispenser screw screws

What size screw does NCR Personas cash dispenser screw use?: M5 × 10 mm for M5 x 10mm pan-head screw in the NCR Personas dispenser assembly.
How long are the screws in NCR Personas cash dispenser screw?: The record gives 10 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
What is the thread pitch of an M5 screw?: 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
What screwdriver do I need for NCR Personas cash dispenser screw?: The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.
Can I use an imperial screw instead of M5?: No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.

Heads up: shipping delay