Needle plate screw for Bernette/EverSewn/Necchi/Singer industrial-style sewing machines screw size
M4 · 6 mm long
If you are replacing a screw on Needle plate screw for Bernette/EverSewn/Necchi/Singer industrial-style sewing machines, the thread is M4, 6 mm long.
Where it is used: product listing explicitly gives dimension 'M4 x 6mm' for the needle plate screw.
This entry is marked confirmed and comes from millardsewing.com.
M4 means a 4 mm nominal diameter with a 0.7 mm thread pitch. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
Needle plate screw for Bernette/EverSewn/Necchi/Singer industrial-style sewing machines screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 6 mm | 0.7 mm | not stated | not stated | Product listing explicitly gives dimension 'M4 x 6mm' for the needle plate screw | Confirmed |
Fitment records and sources
Product listing explicitly gives dimension 'M4 x 6mm' for the needle plate screw
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
How to check the screw before you buy
- Industrial parts lists usually give the full callout (thread, length, head, grade); match all four, not just the thread.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 6 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4
- Pinball machines are historically imperial (UNC/UNF). Metric M4 shows up mainly in specific parts like cooling fans or in European rebuilds.
- OEM laundry-parts storefronts (Alliance Laundry) are a very reliable source because they name the exact DIN standard and thread callout in the product title itself, unlike most service manuals which just show an exploded-view drawing.
More in Industrial & Machinery
ABB ACS580 motor terminal box / cable glandsABB ACS580 terminal hardware (frames R3-R5)ABB random-wound motor terminal boxes (ACS580 drive systems)Allen-Bradley ControlLogix 1756-A chassisAngle grinder gear housingBianchi / Nuova Simonelli / Rheavendors / Saeco vending machineCircular saw blade guard pivotContender Planetary Mixer MXP004/MXP005 (commercial bakery mixer) electrical diagram terminal screwsCordless drill housing shellsCOSEL power supply terminal block (used in industrial/pump/water-treatment control panels)Datalogic DS2400 fixed-mount barcode readerDeWalt D51430 / D51431 pneumatic nailer
Browse all 113 in Industrial & Machinery →The same screw also fits
Devices whose records share a thread with Needle plate screw for Bernette/EverSewn/Necchi/Singer industrial-style sewing machines, closest length match first.
- Singer 3323/3321 sewing machine also M4 × 6 mm
- Singer Viking Emerald 203 sewing machine also M4 × 6 mm
- Makita GB801 also M4 × 6 mm
- Singer 4423 / Necchi / Bernette / EverSewn sewing machines also M4 × 6 mm
- Elo touch display/signage panel (dimensional drawing MS602782) also M4 × 6 mm
- VESA MIS-B displays (4-7.9 inch) also M4 × 6 mm
- Elo E458992 EMV PIN Pad Mounting Kit also M4 × 6 mm
- Singer / Bernette / EverSewn / Necchi sewing machines also M4 × 6 mm
Questions about Needle plate screw for Bernette/EverSewn/Necchi/Singer industrial-style sewing machines screws
- What size screw does Needle plate screw for Bernette/EverSewn/Necchi/Singer industrial-style sewing machines use?
- M4 × 6 mm for product listing explicitly gives dimension 'M4 x 6mm' for the needle plate screw.
- How long are the screws in Needle plate screw for Bernette/EverSewn/Necchi/Singer industrial-style sewing machines?
- The record gives 6 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for Needle plate screw for Bernette/EverSewn/Necchi/Singer industrial-style sewing machines?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.