Vertical trolley 48V 280Ah battery enclosure casters screw size
M5 · length not stated in the sources
Our records put Vertical trolley 48V 280Ah battery enclosure casters on M5 screws. None of the sources we found gives an exact length, so measure the original before you order.
It is listed for caster axle has M5 threads on both ends, 2 fastening screws, 10 Nm torque.
This entry is marked confirmed and comes from nkon.nl.
For reference, M5 is 5 mm across the threads at 0.8 mm pitch. The imperial size people confuse it with: #10-32 (4.83 mm) — the other common rack thread; check before mixing.
Vertical trolley 48V 280Ah battery enclosure casters screw specifications
One row per fitment record. Head, drive and torque are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Torque | Where it goes | Status |
|---|---|---|---|---|---|---|---|
| M5 | not stated | 0.8 mm | not stated | not stated | 10 Nm | Caster axle has M5 threads on both ends, 2 fastening screws, 10 Nm torque | Confirmed |
Fitment records and sources
Caster axle has M5 threads on both ends, 2 fastening screws, 10 Nm torque
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- Rack and enclosure hardware mixes metric and imperial (#8-32, #10-32, #6-32), so confirm the thread before forcing a screw.
- Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- Driver: the source does not name the drive. Standard M5 heads take PH2 for Phillips and T25 for Torx, and a 4 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
Common mix-ups with M5
- Carbon bosses strip easily: 2-4 Nm torque and the right length so the bolt doesn't bottom out.
- M5x0.8 is the de facto universal bike thread — confirm 0.8mm pitch before threading into carbon or alloy bosses.
More in Electronics, Racks & Enclosures
The same screw also fits
Devices whose records share a thread with Vertical trolley 48V 280Ah battery enclosure casters, closest length match first.
- Banner SXA-MBK laser scanner angle adjustment bracket also M5
- Marine swivel mount brackets also M5
- Eurorack rail end-fixing screws (Vector rails, metric variant) also M5
- 19in equipment rack (Kendall Howard cage nuts) also M5
- E-scooter front fork axle bracket also M5
- Kendall Howard universal rack rails also M5
- Tent frame hub connectors also M5
- RV appliance and vent fan brackets also M5
Questions about Vertical trolley 48V 280Ah battery enclosure casters screws
- What size screw does Vertical trolley 48V 280Ah battery enclosure casters use?
- M5 for caster axle has M5 threads on both ends, 2 fastening screws, 10 Nm torque.
- How long are the screws in Vertical trolley 48V 280Ah battery enclosure casters?
- None of the sources states a length. Remove one screw and measure it from under the head to the tip (overall for a countersunk head).
- What is the thread pitch of an M5 screw?
- 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
- What screwdriver do I need for Vertical trolley 48V 280Ah battery enclosure casters?
- The sources do not name the drive. For M5, Phillips heads normally take PH2 and Torx heads T25; socket heads take a 4 mm hex key.
- Can I use an imperial screw instead of M5?
- No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.
- How tight should the M5 screw on Vertical trolley 48V 280Ah battery enclosure casters be?
- The source gives 10 Nm for caster axle has M5 threads on both ends, 2 fastening screws, 10 Nm torque.