Voron 2.4 frame corner brackets screw size
M5 · 10 to 40 mm long
Our records put Voron 2.4 frame corner brackets on M5 screws in lengths from 10 to 40 mm.
It is listed for BOM specifies M5x16 SHCS/BHCS for frame extrusion joints.
Head and drive, as the source states them: socket cap head and Hex socket (Allen) drive.
This entry is marked confirmed and comes from github.com.
For reference, M5 is 5 mm across the threads at 0.8 mm pitch. The imperial size people confuse it with: #10-32 (4.83 mm) — the other common rack thread; check before mixing.
Voron 2.4 frame corner brackets screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M5 | 10–40 mm | 0.8 mm | Socket cap | Hex socket (Allen) | BOM specifies M5x16 SHCS/BHCS for frame extrusion joints | Confirmed |
Fitment records and sources
BOM specifies M5x16 SHCS/BHCS for frame extrusion joints
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- Into printed plastic, the screw either self-taps or needs a heat-set insert; machine screws straight into plastic strip easily.
- Diameter: across the threads an M5 screw measures about 5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.8 mm from one thread crest to the next (12.5 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: for socket cap screws, measure from under the head to the tip (countersunk heads are the exception: they are measured overall).
- The records span 10–40 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source names a Hex socket (Allen) drive. For comparison, standard M5 heads take PH2 (Phillips) or T25 (Torx), or a 4 mm hex key.
- Tightening: no device-specific torque is published in these records. The site's general figure for M5 is about 4.0-6.0 N·m into metal threads and 1.5-2.5 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M5
- 2020 extrusion end-tap holes vary between 4.2mm (M5) and 5mm (M6) core depending on manufacturer — always measure before tapping.
- M5x0.8 is the de facto universal bike thread — confirm 0.8mm pitch before threading into carbon or alloy bosses.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M5 x 10mm Black Wafer Head Bike Fender & Rack Screws for Tern MTR Fenders, Blackburn EX-1 Rack, ENVO Stax & René Herse Fender Set – 10-Pack Replacement
$5.99Choose size -
M5 x 10mm Black Wafer Head Folding Mechanism Screws for GOTRAX GXL V2, Rival, XR Ultra & XR Elite – 10-Pack Replacement
$5.99Choose size -
M5 x 12mm Black Wafer Head Cut-off Saw Screws for STIHL TS400 Cut-off Saw (replaces IS-M5x12 9022 341 0960) – 10-Pack Replacement
$5.99Choose size -
M5 x 12mm Black Wafer Head Generator Cover Screws for Honda EM, EB, EG Generators & EU3200i (replaces 90102-Z21-000) – 10-Pack Replacement
$5.99Choose size
More in 3D Printing, CNC & Robotics
2020 extrusion T-nuts (light duty)2020 extrusion T-nuts (standard)2020 T-slot hammer head bolts2020/2040 extrusion end tap2040 extrusion T-nuts3030 extrusion T-nuts (heavy duty)3030/4040 extrusion end tap3D printer & CNC enclosures3D printer hotend to X-carriageActobotics servo horn / hubArduino Mega 2560 mounting holesArduino shield stacking standoffs
Browse all 149 in 3D Printing, CNC & Robotics →The same screw also fits
Devices whose records share a thread with Voron 2.4 frame corner brackets, closest length match first.
- 2020 extrusion T-nuts (standard) also M5 × 10–20 mm
- Voron 2.4 3D printer also M5 × 10 mm
- Husqvarna Automower 305 / 308 robotic mower also M5 × 12 mm
- Prusa frame-to-extrusion joints also M5 × 12–16 mm
- Carbide3D Shapeoko 5 Pro CNC router also M5 × 10 mm
- NEMA 23 stepper motor face also M5 × 10–16 mm
- OpenBuilds C-Beam Machine also M5 × 25–30 mm
- X-Carve / Shapeoko-style OpenBuilds clone kits also M5 × 10–16 mm
Questions about Voron 2.4 frame corner brackets screws
- What size screw does Voron 2.4 frame corner brackets use?
- M5 × 10–40 mm for BOM specifies M5x16 SHCS/BHCS for frame extrusion joints.
- How long are the screws in Voron 2.4 frame corner brackets?
- The records range from 10 to 40 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M5 screw?
- 0.8 mm (coarse), which is the standard pitch for M5 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 4.2 mm and the normal clearance hole is 5.5 mm.
- What screwdriver do I need for Voron 2.4 frame corner brackets?
- The source lists a Hex socket (Allen) drive. Standard M5 heads otherwise take PH2 (Phillips) or T25 (Torx), or a 4 mm hex key.
- Can I use an imperial screw instead of M5?
- No. Imperial look-alike: #10-32 (4.83 mm) — the other common rack thread; check before mixing. Use a true M5 screw so it does not cross-thread or strip the hole.