• Free shipping over $25

  • Free help & advice

  • Open 7 days a week

Raspberry Pi Screws

(3 products)

Raspberry Pi boards are mounted with small metric screws, and the ones that come with a case or add-on board are the first thing to roll off the bench. This page groups every screw we list for Raspberry Pi work: M2.5 x 8 mm flat-head screws for closing Pi 5 cases and fixing PoE and NVMe HATs, plus M2 x 4 mm and M3 x 5 mm screws sold for Pi hardware repairs and camera module mounts. They come as single replacements, 10-packs and 50 or 100-piece packs, in black.

Choosing the right one. The mounting holes on Raspberry Pi boards are sized for M2.5 screws, so start there for anything that fastens to the board itself. For length, add the thickness of the case wall or HAT spacer to the thread you need in the standoff, and check that a screw does not bottom out before it tightens. If an accessory has its own holes, measure them, or test-fit a screw by hand before ordering a pack.

Related: M2.5 x 8mm screws · All M2.5 screws · Hobby & DIY screws · Raspberry Pi screw size guide · M2 vs M2.5 vs M3

Find your screw by model

Find your screw by device

View as

Products

Not sure which size you need? These free tools will identify it in under a minute:

How do I know these screws will fit my device?

Every listing states the exact metric thread, length, head type and finish. Match it against your original screw, your model's page in our model guides, or measure with the finder tool. If it's still wrong, we make it right.

Can I buy just one screw?

Yes — that's our specialty. Most sizes are sold as single screws, with 10-packs, 50-packs and 100-packs for shops and fleets. Each cart line needs to reach $4.99, so very low-priced singles are added in a small multiple.

How fast is shipping?

Orders usually ship within 24 hours (Monday to Saturday) from Elgin, South Carolina, with tracking. US orders of $25 or more ship free, and typical US transit is 1 to 5 business days. See the shipping policy.

Compare /5

Loading...