ASUS VG32AQA1A screw size
M4 / M6 · 8 to 16.2 mm long
ASUS VG32AQA1A takes M4 and M6 metric screws in lengths from 8 to 16.2 mm.
There are 3 separate fitment records for it, including vesa mount (M4), hinge (M4) and stand (M6).
3 of the 3 records are marked confirmed, drawn from 1 source (dlcdnets.asus.com).
An M4 screw is 4 mm in diameter with a 0.7 mm pitch, tapped with a 3.3 mm drill; imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
ASUS VG32AQA1A screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 10 mm | 0.7 mm | not stated | not stated | Vesa mount | Confirmed |
| M4 | 8 mm | 0.7 mm | not stated | not stated | Hinge | Confirmed |
| M6 | 16.2 mm | 1 mm | not stated | not stated | Stand | Confirmed |
Fitment records and sources
Vesa mount
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Hinge
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Stand
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- VESA holes are threaded inserts in the back cover; if a screw stops early, back it out rather than forcing it, because a bottomed-out screw can crack the panel housing.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). This device also uses M6, so measure each screw rather than assuming they match.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 8–16.2 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4 / M6
- Display mounts mix systems: the screen side is metric M4/M6, but the wall side of many mounts uses imperial wood screws such as #14 x 2.5in.
- TV mount screw size follows the VESA pattern, not the brand — the same maker's small and large sets need M4, M6 or M8.
- VESA displays over 50kg move up to M8 x 1.25, which is outside metric M6 hardware - don't force an M6 bolt into a heavy-panel mount.
- VESA display mounts are M4, M6 or M8 depending on the pattern size; measure before ordering.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
More in Displays, TVs & Mounts
The same screw also fits
Devices whose records share a thread with ASUS VG32AQA1A, closest length match first.
- Universal full-motion TV mount kits also M6 × 16.2 mm
- Dell Pro P 24 16:10 monitor (P2426E) also M4 × 10 mm
- Dell P2018H also M4 × 10 mm
- Dell S3220DGF also M4 × 10 mm
- Philips IntelliVue display mounting bracket also M4 × 8 mm
- HP P24h G4 also M4 × 10 mm
- LG 32LM6400 also M4 × 8 mm
- Dell P2016 also M4 × 10 mm
Questions about ASUS VG32AQA1A screws
- What size screw does ASUS VG32AQA1A use?
- M4 × 10 mm for vesa mount; M4 × 8 mm for hinge; M6 × 16.2 mm for stand.
- How long are the screws in ASUS VG32AQA1A?
- The records range from 8 to 16.2 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for ASUS VG32AQA1A?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.