27-34in ultrawide monitors screw size
M6 · 12 to 16 mm long
Our records put 27-34in ultrawide monitors on M6 screws in lengths from 12 to 16 mm.
It is listed for thicker chassis sometimes ships M6 hardware even on 100x100.
This entry is marked reported.
For reference, M6 is 6 mm across the threads at 1 mm pitch. The imperial size people confuse it with: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
27-34in ultrawide monitors screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 12–16 mm | 1 mm | not stated | not stated | thicker chassis sometimes ships M6 hardware even on 100x100 | Reported |
Fitment records and sources
thicker chassis sometimes ships M6 hardware even on 100x100
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- VESA holes are threaded inserts in the back cover; if a screw stops early, back it out rather than forcing it, because a bottomed-out screw can crack the panel housing.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 12–16 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M6 heads take PH3 for Phillips and T30 for Torx, and a 5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M6
- VESA displays over 50kg move up to M8 x 1.25, which is outside metric M6 hardware - don't force an M6 bolt into a heavy-panel mount.
- Hygienic/3-A food-industry M6 screws are a distinct fastener class (with integrated sealing gasket/washer) from standard DIN 912 M6 socket-head screws; substituting a plain DIN 912 M6 screw on food/sanitary equipment breaks the hygienic seal even though the thread is nominally the same size.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M6 x 16mm Black Wafer Head Rack Screws for Rittal DK 7094.100 / 7094.110 / 7094.140 19-inch Rack – 20-Pack Replacement
$8.99Choose size -
M6 x 16mm Black Wafer Head Awning & Box Screws for Thule Awning 326 / 327 / 328, Conduit Box 317 & Xpedition 820 / 821 (50333) – 8-Pack Replacement
$6.99Choose size -
M6 x 12mm Black Wafer Head TV Back-Panel Screws for Vizio VQD65R-1004, VQD70R-1001, VQM55C-1004, VQM65C-1004 – 8-Pack Replacement
$6.99Choose size -
M6 x 12mm Black Wafer Head Brake Line Screws for GOTRAX G3, G4, GMAX & GMAX Ultra – 8-Pack Replacement
$6.99Choose size
More in Displays, TVs & Mounts
3D printer electronics51.2V 280Ah battery pack concealed carry handleAccuracy International AICS chassis stockside securing screwsAcer / ASUS / BenQ monitorsAcer Predator X34Acer XR342CKAGCO SimplEbale monitor kit (Massey Ferguson MF 1800)Alpha Series performance display (forklift)Amazon Echo (full size) driversAmazon Echo Dot internalsAmico patient monitor 5-inch shelf with VESA plateApple HomePod internal drivers
Browse all 388 in Displays, TVs & Mounts →The same screw also fits
Devices whose records share a thread with 27-34in ultrawide monitors, closest length match first.
- Pro-AV truss clamps also M6 × 16 mm
- VESA MIS-F large display mount also M6 × 12–16 mm
- StarTech Universal Projector Wall Mount (PROJWALLMNT) also M6 × 12–16 mm
- Larger flat-panel TVs (VESA interface) also M6 × 12 mm
- Atdec Telehook TH-2250-VF display wall mount also M6 × 12–16 mm
- Dell U4320Q also M6 × 12 mm
- Samsung TVs (200x200 / 400x400) also M6 × 12–14 mm
- Hygienic 3-A screw with blue silicone gasket (MOVET) for food processing machinery also M6 × 12 mm
Questions about 27-34in ultrawide monitors screws
- What size screw does 27-34in ultrawide monitors use?
- M6 × 12–16 mm for thicker chassis sometimes ships M6 hardware even on 100x100.
- How long are the screws in 27-34in ultrawide monitors?
- The records range from 12 to 16 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for 27-34in ultrawide monitors?
- The sources do not name the drive. For M6, Phillips heads normally take PH3 and Torx heads T30; socket heads take a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.