Bosch Rexroth T-head bolt, slot 8 screw size
M6 · 25 mm long
Our records put Bosch Rexroth T-head bolt, slot 8 on M6 screws, 25 mm long.
Where it is used: T-head bolt M6x25 for slot 8 aluminium profile.
This entry is marked confirmed and comes from esd.equipment.
For reference, M6 is 6 mm across the threads at 1 mm pitch. The imperial size people confuse it with: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
Bosch Rexroth T-head bolt, slot 8 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 25 mm | 1 mm | not stated | not stated | T-head bolt M6x25 for slot 8 aluminium profile | Confirmed |
Fitment records and sources
T-head bolt M6x25 for slot 8 aluminium profile.
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- If several screws hold the same part, check that they are all the same length before assuming they are.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 25 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M6 heads take PH3 for Phillips and T30 for Torx, and a 5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M6
- VESA displays over 50kg move up to M8 x 1.25, which is outside metric M6 hardware - don't force an M6 bolt into a heavy-panel mount.
- Climbing bolt hangers and most ski bindings are M8 and up, outside this database's M1.2-M6 range.
More in Other Equipment
2020 aluminium extrusion T-nutsAcer Aspire / SwiftAllen-Bradley PowerFlex 520-series mounting adapter plateAllen-Bradley PowerFlex 750-seriesAllen-Bradley PowerFlex 750-series I/O shield terminationAllen-Bradley PowerFlex 755 IP00 control podAmiga 500 rear/front case screws (Retro32 replacement set)Arduino Uno / MegaASUS / MSI / Gigabyte / ASRock motherboardsBackscatter FLIP3.1 underwater filter frame screws (2x)Backscatter FLIP3.1 underwater flip-frame retaining screwBosch Rexroth swivel-in T-slot nut, slot 8
Browse all 125 in Other Equipment →The same screw also fits
Devices whose records share a thread with Bosch Rexroth T-head bolt, slot 8, closest length match first.
- Flat-pack furniture cam-lock fittings (IKEA-style knock-down) also M6 × 25 mm
- Furniture leveling foot also M6 × 25 mm
- Eschmann LS5 / SES2555 autoclave also M6 × 25 mm
- Kayak accessory rail T-bolt kit also M6 × 25 mm
- Rexel S16 paper shredder also M6 × 25 mm
- Bicycle disc caliper mount (post / IS) also M6 × 25 mm
- Premier Mounts PBL-UMS/PBL-UMW Universal Projector Mount also M6 × 25 mm
- GE HealthCare Anesthesia Delivery Systems also M6 × 25 mm
Questions about Bosch Rexroth T-head bolt, slot 8 screws
- What size screw does Bosch Rexroth T-head bolt, slot 8 use?
- M6 × 25 mm for T-head bolt M6x25 for slot 8 aluminium profile.
- How long are the screws in Bosch Rexroth T-head bolt, slot 8?
- The record gives 25 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for Bosch Rexroth T-head bolt, slot 8?
- The sources do not name the drive. For M6, Phillips heads normally take PH3 and Torx heads T30; socket heads take a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.