Burton Re:Flex snowboard bindings (4x4 / 3D boards) screw size
M6 · 13 to 16 mm long
Burton Re:Flex snowboard bindings (4x4 / 3D boards) takes M6 metric screws in lengths from 13 to 16 mm.
The record covers burton's official replacement mounting hardware for Re:Flex bindings on 4x4 and 3D hole-pattern boards is M6 — sold as M6x13 and M6x16 sets. Not for Channel boards (those use shorter M6x13 EST screws).
This entry is marked confirmed and comes from burton.com.
For reference, M6 is 6 mm across the threads at 1 mm pitch. The imperial size people confuse it with: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
Burton Re:Flex snowboard bindings (4x4 / 3D boards) screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 13–16 mm | 1 mm | not stated | not stated | Burton's official replacement mounting hardware for Re:Flex bindings on 4x4 and 3D hole-pattern boards is M6 — sold as M6x13 and M6x16 sets. Not for Channel boards (those use shorter M6x13 EST screws) | Confirmed |
Fitment records and sources
Burton's official replacement mounting hardware for Re:Flex bindings on 4x4 and 3D hole-pattern boards is M6 — sold as M6x13 and M6x16 sets. Not for Channel boards (those use shorter M6x13 EST screws).
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- Outdoor hardware should be stainless or coated to stop corrosion seizing it in place.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 13–16 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M6 heads take PH3 for Phillips and T30 for Torx, and a 5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M6
- Burton sells two different M6 lengths: M6x16 for Re:Flex on 4x4/3D boards and M6x13 for EST on Channel boards. The 16mm screw can bottom out or dimple a Channel board base.
- VESA display mounts are M4, M6 or M8 depending on the pattern size; measure before ordering.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M6 x 16mm Black Wafer Head Rack Screws for Rittal DK 7094.100 / 7094.110 / 7094.140 19-inch Rack – 20-Pack Replacement
$8.99Choose size -
M6 x 16mm Black Wafer Head Awning & Box Screws for Thule Awning 326 / 327 / 328, Conduit Box 317 & Xpedition 820 / 821 (50333) – 8-Pack Replacement
$6.99Choose size
More in Sports, Outdoors & Optics Mounts
The same screw also fits
Devices whose records share a thread with Burton Re:Flex snowboard bindings (4x4 / 3D boards), closest length match first.
- Alpine binding heel/toe piece (heavy duty) also M6 × 13–16 mm
- Burton EST bindings on The Channel also M6 × 13 mm
- Powersports battery terminal bolts also M6 × 15–16 mm
- Rack mounting screw and cage nut set (NRS-M1616-N-50) also M6 × 16 mm
- Motorcycle side panels and tail cowl also M6 × 13–16 mm
- Rittal VX VX enclosure hinge countersunk Torx screw also M6 × 14 mm
- Motorcycle/scooter turn signal indicator mounting bolt also M6 × 15 mm
- item Roller Conveyor Aluminum Fastening Bracket D30 also M6 × 14 mm
Questions about Burton Re:Flex snowboard bindings (4x4 / 3D boards) screws
- What size screw does Burton Re:Flex snowboard bindings (4x4 / 3D boards) use?
- M6 × 13–16 mm for burton's official replacement mounting hardware for Re:Flex bindings on 4x4 and 3D hole-pattern boards is M6 — sold as M6x13 and M6x16 sets. Not for Channel boards (those use shorter M6x13 EST screws).
- How long are the screws in Burton Re:Flex snowboard bindings (4x4 / 3D boards)?
- The records range from 13 to 16 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for Burton Re:Flex snowboard bindings (4x4 / 3D boards)?
- The sources do not name the drive. For M6, Phillips heads normally take PH3 and Torx heads T30; socket heads take a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.