Google Pixel 4 XL screw size
M1.2 · length not stated in the sources
Google Pixel 4 XL takes M1.2 metric screws. None of the sources we found gives an exact length, so measure the original before you order.
Where it is used: official Google Pixel 4 XL screw, part G250-05063-01, listed as M1.2 x 1.34 (thread pitch 1.34mm noted in listing, likely a length/pitch code from Google's part naming).
This entry is marked confirmed and comes from fonejoy.com.
M1.2 means a 1.2 mm nominal diameter with a 0.25 mm thread pitch. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute.
Google Pixel 4 XL screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.2 | not stated | 0.25 mm | not stated | not stated | Official Google Pixel 4 XL screw, part G250-05063-01, listed as M1.2 x 1.34 (thread pitch 1.34mm noted in listing, likely a length/pitch code from Google's part naming) | Confirmed |
Fitment records and sources
Official Google Pixel 4 XL screw, part G250-05063-01, listed as M1.2 x 1.34 (thread pitch 1.34mm noted in listing, likely a length/pitch code from Google's part naming)
pitch 0.25 mm · tap 0.95 mm · clearance 1.4 mm · PH000 / JIS 00 / Torx T1–T2
How to check the screw before you buy
- If several screws hold the same part, check that they are all the same length before assuming they are.
- Diameter: across the threads an M1.2 screw measures about 1.2 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.25 mm from one thread crest to the next (40 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- Driver: the source does not name the drive. Standard M1.2 heads take PH000 / JIS 00 for Phillips and T1–T2 for Torx; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.2 is about 5-8 N·cm into metal threads and 3-5 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.2
- M1.2 and M1.4 look identical in an eyeglass repair kit — the wrong one strips soft acetate or metal hinges.
More in Other Equipment
The same screw also fits
Devices whose records share a thread with Google Pixel 4 XL, closest length match first.
- Google Pixel 6 also M1.2
- Google Pixel 5 also M1.2
- Dell Inspiron 15 7586 also M1.2
- Scale models & RC detail parts also M1.2
- Dell Pro Max 18 Plus MB18250 also M1.2
- Hearing aid battery door hinge also M1.2
- Lenovo ThinkPad Z16 Gen 2 also M1.2
- Dell Inspiron 13 7380 also M1.2
Questions about Google Pixel 4 XL screws
- What size screw does Google Pixel 4 XL use?
- M1.2 for official Google Pixel 4 XL screw, part G250-05063-01, listed as M1.2 x 1.34 (thread pitch 1.34mm noted in listing, likely a length/pitch code from Google's part naming).
- How long are the screws in Google Pixel 4 XL?
- None of the sources states a length. Remove one screw and measure it from under the head to the tip (overall for a countersunk head).
- What is the thread pitch of an M1.2 screw?
- 0.25 mm (coarse), which is the standard pitch for M1.2 machine screws. The tap drill is 0.95 mm and the normal clearance hole is 1.4 mm.
- What screwdriver do I need for Google Pixel 4 XL?
- The sources do not name the drive. For M1.2, Phillips heads normally take PH000 / JIS 00 and Torx heads T1–T2.
- Can I use an imperial screw instead of M1.2?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) is the closest imperial screw, but it is bigger — not a substitute. Use a true M1.2 screw so it does not cross-thread or strip the hole.