Imported (metric) guitar/bass bridge, long saddles screw size
M3 · 35 mm long
Imported (metric) guitar/bass bridge, long saddles takes M3 metric screws, 35 mm long.
Where it is used: M3 x 35mm saddle intonation screw and spring set for import metric bridges.
This entry is marked reported and comes from musiclily.com.
For reference, M3 is 3 mm across the threads at 0.5 mm pitch. The imperial size people confuse it with: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3.
Imported (metric) guitar/bass bridge, long saddles screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M3 | 35 mm | 0.5 mm | not stated | not stated | M3 x 35mm saddle intonation screw and spring set for import metric bridges | Reported |
Fitment records and sources
M3 x 35mm saddle intonation screw and spring set for import metric bridges
pitch 0.5 mm · tap 2.5 mm · clearance 3.4 mm · PH1 / Torx T10
How to check the screw before you buy
- Stage and rack gear mixes metric with #10-32 rack screws, so check before swapping.
- Diameter: across the threads an M3 screw measures about 3 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.5 mm from one thread crest to the next (20 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 35 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M3 heads take PH1 for Phillips and T10 for Torx, and a 2.5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M3 is about 80-130 N·cm into metal threads and 35-60 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M3
- Guitar bridges and pickups exist in both metric (M3) import and imperial (#4-40/#6-32) USA versions - check origin before ordering.
- US-made guitar bridges use #4/#6 imperial intonation screws while imported bridges use M3 — the wrong one strips the saddle.
More in Audio, Music & Stage
Accordion reed blocksAllparts metric bridge length screwsARRI Mini Follow Focus MFF-2 / related follow-focus hardwareBoss compact guitar pedal battery doorCymbal stand / hi-hat wing nutCymbal stand top wing nutCymbal stand wing nutDrum hardware wing bolt / memory lockDrum tension rodDrum tension rod / lug mounting screwDuratruss Mini 360 F14 10kg truss clampFender Standard Series bass bridge
Browse all 48 in Audio, Music & Stage →The same screw also fits
Devices whose records share a thread with Imported (metric) guitar/bass bridge, long saddles, closest length match first.
- Prusa MK3S extruder also M3 × 35 mm
- Prusa i3 MK3S/MK4 printed parts and extruder also M3 × 35 mm
- Molex Secured Wall Mount Fiber Enclosure (DSC/QLC UNLDD) also M3 × 35 mm
- Ubiquiti UniFi AP ceiling mount also M3 × 35 mm
- Prusa MINI frame and extruder also M3 × 35 mm
- PC case and radiator fan mounting also M3 × 35 mm
- Bambu Lab X1 / P1 / A1 frame and toolhead also M3 × 35 mm
- Prusa MK4 Nextruder also M3 × 35 mm
Questions about Imported (metric) guitar/bass bridge, long saddles screws
- What size screw does Imported (metric) guitar/bass bridge, long saddles use?
- M3 × 35 mm for M3 x 35mm saddle intonation screw and spring set for import metric bridges.
- How long are the screws in Imported (metric) guitar/bass bridge, long saddles?
- The record gives 35 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M3 screw?
- 0.5 mm (coarse), which is the standard pitch for M3 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.5 mm and the normal clearance hole is 3.4 mm.
- What screwdriver do I need for Imported (metric) guitar/bass bridge, long saddles?
- The sources do not name the drive. For M3, Phillips heads normally take PH1 and Torx heads T10; socket heads take a 2.5 mm hex key.
- Can I use an imperial screw instead of M3?
- No. Imperial look-alike: #5-40 (3.18 mm) or #4-40 — neither interchanges with M3. Use a true M3 screw so it does not cross-thread or strip the hole.