NeoBiotech fixture remover screw screw size
M1.4 · length not stated in the sources
Our records put NeoBiotech fixture remover screw on M1.4 screws. None of the sources we found gives an exact length, so measure the original before you order.
Where it is used: product line available in M1.4, M1.6 and M1.8.
This entry is marked confirmed and comes from swallowdental.co.uk.
For reference, M1.4 is 1.4 mm across the threads at 0.3 mm pitch. The imperial size people confuse it with: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix.
NeoBiotech fixture remover screw screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M1.4 | not stated | 0.3 mm | not stated | not stated | Product line available in M1.4, M1.6 and M1.8 | Confirmed |
Fitment records and sources
Product line available in M1.4, M1.6 and M1.8
pitch 0.3 mm · tap 1.1 mm · clearance 1.6 mm · PH000 / PH00 / Torx T2–T3
How to check the screw before you buy
- Keep material and finish the same as the original (often stainless) on equipment that is cleaned or sterilised.
- Diameter: across the threads an M1.4 screw measures about 1.4 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.3 mm from one thread crest to the next (33.33 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- Driver: the source does not name the drive. Standard M1.4 heads take PH000 / PH00 for Phillips and T2–T3 for Torx, and a 1.3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M1.4 is about 8-12 N·cm into metal threads and 4-7 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M1.4
- Dental implant screws (M1.4/M1.6) are proprietary per system — Bredent, NeoBiotech, Nobel and Straumann are not interchangeable even at the same nominal size.
- Whoop motor screws differ between M1.4x3mm and M1.6x4mm across BetaFPV/NewBeeDrone product generations — check the exact model.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M1.4 Phillips Flat Head Carbon Steel Machine Screws (Multiple Lengths & Finishes)
$5.00Choose size -
M1.4 x 3mm Black Wafer Head Battery Lock Screws for Sennheiser MKH800, SK6000 & SK5012 – 20-Pack Replacement
$4.99Choose size -
M1.6 Phillips Flat Head Carbon Steel Machine Screws (Multiple Lengths & Finishes)
$0.05Choose size -
M1.6 Phillips Flat Head Carbon Steel Machine Screws (Multiple Lengths & Finishes) | 50-Pack
From $4.99Choose size
More in Medical & Laboratory
The same screw also fits
Devices whose records share a thread with NeoBiotech fixture remover screw, closest length match first.
- Behind-the-ear hearing aid shell also M1.4
- Sennheiser wireless mic battery/locking mechanism (MKH800, SK6000) also M1.4
- Dental handpiece cartridge screws also M1.4
- Olympus Flexible Endoscopes also M1.4
- Bredent dental prosthetic screw also M1.4
- Hearing aid shells also M1.4
- Precision instrument panels also M1.4
- NBK SSCZS miniature captive screw for precision instruments also M1.4
Questions about NeoBiotech fixture remover screw screws
- What size screw does NeoBiotech fixture remover screw use?
- M1.4 for product line available in M1.4, M1.6 and M1.8.
- How long are the screws in NeoBiotech fixture remover screw?
- None of the sources states a length. Remove one screw and measure it from under the head to the tip (overall for a countersunk head).
- What is the thread pitch of an M1.4 screw?
- 0.3 mm (coarse), which is the standard pitch for M1.4 machine screws. The tap drill is 1.1 mm and the normal clearance hole is 1.6 mm.
- What screwdriver do I need for NeoBiotech fixture remover screw?
- The sources do not name the drive. For M1.4, Phillips heads normally take PH000 / PH00 and Torx heads T2–T3; socket heads take a 1.3 mm hex key.
- Can I use an imperial screw instead of M1.4?
- No. Imperial look-alike: #0-80 UNF (1.52 mm) — close in diameter, different pitch, do not mix. Use a true M1.4 screw so it does not cross-thread or strip the hole.