Oyaide SCR-S phono cartridge screw set screw size
M2.5 · 6 to 10 mm long
If you are replacing a screw on Oyaide SCR-S phono cartridge screw set, the thread is M2.5 in lengths from 6 to 10 mm.
It is listed for product titled 'Oyaide M2.5 phono cartridge screw set w/carbon graphite nylon washer', contains 6/8/10mm lengths, explicit M2.5 thread.
This entry is marked confirmed and comes from audiohobby.eu.
For reference, M2.5 is 2.5 mm across the threads at 0.45 mm pitch. The imperial size people confuse it with: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in.
Oyaide SCR-S phono cartridge screw set screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M2.5 | 6–10 mm | 0.45 mm | not stated | not stated | Product titled 'Oyaide M2.5 phono cartridge screw set w/carbon graphite nylon washer', contains 6/8/10mm lengths, explicit M2.5 threadthread-locking patch, washer / flange face | Confirmed |
Fitment records and sources
Product titled 'Oyaide M2.5 phono cartridge screw set w/carbon graphite nylon washer', contains 6/8/10mm lengths, explicit M2.5 thread
pitch 0.45 mm · tap 2.05 mm · clearance 2.9 mm · PH1 / Torx T8
How to check the screw before you buy
- For a wall or arm mount, the screw has to engage the threaded insert by several turns but must not bottom out, so measure the insert depth and add the thickness of the bracket and any spacers.
- Diameter: across the threads an M2.5 screw measures about 2.5 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 0.45 mm from one thread crest to the next (22.22 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 6–10 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M2.5 heads take PH1 for Phillips and T8 for Torx, and a 2 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M2.5 is about 45-70 N·cm into metal threads and 20-35 N·cm into plastic bosses; snug it up and stop.
Common mix-ups with M2.5
- Nylon-coated M2.5 screws (ThinkPad Edge) are thread-locking; plain replacements work loose over time.
- M2 and M2.5 are both marketed for turntable headshells; buyers must check which their specific cartridge/tonearm brand uses.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M2.5 x 6mm Laptop Motherboard Replacement Screws Wafer Head 10-Pack Black
$4.99 -
10x M2.5 x 6mm Phillips Screws for Lenovo ThinkPad X131e Chromebook LCD Hinge
$4.99
-
M2.5 x 8mm Screws for Retevis RT27 Radio Belt Clip 10-Pack Black Phillips
$4.99 -
M2.5 x 8mm Screws for Raspberry Pi 5 Case and PoE HAT 10-Pack Black
$4.99 -
M2.5 x 10mm Phillips Wafer Head Screw for Turntable Cartridge Headshell Mount - Pack of 50 Black
$5.99 -
M2.5 x 10mm Phillips Wafer Head Screw for ASUS TUF Gaming A15/F15 Laptop Repair - Single Replacement Black
$0.10 each · min. 50
-
25x M2.5 x 8mm Phillips Screws for Acer Nitro 5 LCD Hinge Assembly
$5.99 -
M2.5 x 8mm Black Wafer Head Screws for Lenovo ThinkPad X131e Chromebook Palmrest Replacement – 10-Pack Black
$4.99Choose size
More in Displays, TVs & Mounts
27-34in ultrawide monitors3D printer electronics51.2V 280Ah battery pack concealed carry handleAccuracy International AICS chassis stockside securing screwsAcer / ASUS / BenQ monitorsAcer Predator X34Acer XR342CKAGCO SimplEbale monitor kit (Massey Ferguson MF 1800)Alpha Series performance display (forklift)Amazon Echo (full size) driversAmazon Echo Dot internalsAmico patient monitor 5-inch shelf with VESA plate
Browse all 388 in Displays, TVs & Mounts →The same screw also fits
Devices whose records share a thread with Oyaide SCR-S phono cartridge screw set, closest length match first.
- Compact projector internals also M2.5 × 6–10 mm
- GE HealthCare/Datex-Ohmeda maternal-infant care equipment also M2.5 × 8 mm
- Raspberry Pi official 7in touchscreen also M2.5 × 6–10 mm
- Sonos One control panel and mic array also M2.5 × 6 mm
- E-scooter dashboards & controllers also M2.5 × 6–10 mm
- Amazon Echo (full size) drivers also M2.5 × 6–10 mm
- GE HealthCare Maternal Infant Care Equipment also M2.5 × 8 mm
- Lenovo E50-70 also M2.5 × 6 mm
Questions about Oyaide SCR-S phono cartridge screw set screws
- What size screw does Oyaide SCR-S phono cartridge screw set use?
- M2.5 × 6–10 mm for product titled 'Oyaide M2.5 phono cartridge screw set w/carbon graphite nylon washer', contains 6/8/10mm lengths, explicit M2.5 thread.
- How long are the screws in Oyaide SCR-S phono cartridge screw set?
- The records range from 6 to 10 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M2.5 screw?
- 0.45 mm (coarse), which is the standard pitch for M2.5 machine screws; a 0.35 mm fine pitch exists but is uncommon. The tap drill is 2.05 mm and the normal clearance hole is 2.9 mm.
- What screwdriver do I need for Oyaide SCR-S phono cartridge screw set?
- The sources do not name the drive. For M2.5, Phillips heads normally take PH1 and Torx heads T8; socket heads take a 2 mm hex key.
- Can I use an imperial screw instead of M2.5?
- No. Imperial look-alike: #3-48 / #4-40 (2.51 / 2.84 mm) — #4-40 is the common US stand-in and it will NOT thread in. Use a true M2.5 screw so it does not cross-thread or strip the hole.
- Where can I buy replacement screws for Oyaide SCR-S phono cartridge screw set?
- TechSpareWarehouse (our own store) lists M2.5 x 6mm, M2.5 x 8mm and M2.5 x 10mm, which match lengths in the records above.