Panasonic TC-L50E60 screw size
M4 / M5 · 15 to 25 mm long
If you are replacing a screw on Panasonic TC-L50E60, the thread is M4 and M5 in lengths from 15 to 25 mm.
There are 2 separate fitment records for it, including stand (M4) and stand (M5).
2 of the 2 records are marked confirmed, drawn from 1 source (help.na.panasonic.com).
M4 means a 4 mm nominal diameter with a 0.7 mm thread pitch. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same.
Panasonic TC-L50E60 screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M4 | 25 mm | 0.7 mm | not stated | not stated | Stand | Confirmed |
| M5 | 15 mm | 0.8 mm | not stated | not stated | Stand | Confirmed |
Fitment records and sources
Stand
pitch 0.7 mm · tap 3.3 mm · clearance 4.5 mm · PH2 / Torx T20
Stand
pitch 0.8 mm · tap 4.2 mm · clearance 5.5 mm · PH2 / Torx T25
How to check the screw before you buy
- For a wall or arm mount, the screw has to engage the threaded insert by several turns but must not bottom out, so measure the insert depth and add the thickness of the bracket and any spacers.
- Diameter: across the threads an M4 screw measures about 4 mm with calipers (usually a hair under). This device also uses M5, so measure each screw rather than assuming they match.
- Pitch: 0.7 mm from one thread crest to the next (14.29 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 15–25 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M4 heads take PH2 for Phillips and T20 for Torx, and a 3 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M4 is about 2.0-3.0 N·m into metal threads and 0.8-1.4 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M4 / M5
- Display mounts mix systems: the screen side is metric M4/M6, but the wall side of many mounts uses imperial wood screws such as #14 x 2.5in.
- Dashcam mounts advertised as '1/4" M4 screw joint' have two different threads: the 1/4"-20 camera thread and a separate M4 grub screw for the ball joint — don't order the wrong one.
- The 'GoPro thread' is M5-0.8, a de facto standard on third-party mounts, and is not the imperial 1/4-20 tripod thread.
- M5x0.8 is the de facto universal bike thread — confirm 0.8mm pitch before threading into carbon or alloy bosses.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
More in Displays, TVs & Mounts
The same screw also fits
Devices whose records share a thread with Panasonic TC-L50E60, closest length match first.
- Bullet CCTV camera housing also M5 × 15 mm
- Panasonic TC-L42EW60 also M4 × 25 mm
- Panasonic TC-L42D30 also M5 × 15 mm
- Track lighting heads also M5 × 15 mm
- Atdec Telehook TH-2250-VF display wall mount also M4 × 25 mm
- ATV plastics and fenders also M5 × 15 mm
- Panasonic TC-L65E60 also M4 × 25 mm
- Panasonic TC-L42E60 also M4 × 25 mm
Questions about Panasonic TC-L50E60 screws
- What size screw does Panasonic TC-L50E60 use?
- M4 × 25 mm for stand; M5 × 15 mm for stand.
- How long are the screws in Panasonic TC-L50E60?
- The records range from 15 to 25 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M4 screw?
- 0.7 mm (coarse), which is the standard pitch for M4 machine screws; a 0.5 mm fine pitch exists but is uncommon. The tap drill is 3.3 mm and the normal clearance hole is 4.5 mm.
- What screwdriver do I need for Panasonic TC-L50E60?
- The sources do not name the drive. For M4, Phillips heads normally take PH2 and Torx heads T20; socket heads take a 3 mm hex key.
- Can I use an imperial screw instead of M4?
- No. Imperial look-alike: #8-32 (4.17 mm) — the standard US PC/rack screw, close but not the same. Use a true M4 screw so it does not cross-thread or strip the hole.