Samsung TVs (200x200 / 400x400) screw size
M6 · 10 to 14 mm long
Samsung TVs (200x200 / 400x400) takes M6 metric screws in lengths from 10 to 14 mm.
It is listed for samsung support lists M6 among the three sizes used across the lineup.
This entry is marked confirmed and comes from smarthomestarter.com.
For reference, M6 is 6 mm across the threads at 1 mm pitch. The imperial size people confuse it with: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
Samsung TVs (200x200 / 400x400) screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 10–14 mm | 1 mm | not stated | not stated | Samsung support lists M6 among the three sizes used across the lineup | Confirmed |
Fitment records and sources
Samsung support lists M6 among the three sizes used across the lineup
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- VESA holes are threaded inserts in the back cover; if a screw stops early, back it out rather than forcing it, because a bottomed-out screw can crack the panel housing.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 10–14 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M6 heads take PH3 for Phillips and T30 for Torx, and a 5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M6
- VESA displays over 50kg move up to M8 x 1.25, which is outside metric M6 hardware - don't force an M6 bolt into a heavy-panel mount.
- Astro dovetail hardware is inconsistent: Losmandy-brand dovetail plate screws are 1/4-20 (imperial) per Losmandy/Astro-Physics documentation, while PrimaLuceLab's PLUS-standard dovetails explicitly use M6 — don't assume metric across all 'Losmandy-style' dovetail ecosystems.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
More in Displays, TVs & Mounts
27-34in ultrawide monitors3D printer electronics51.2V 280Ah battery pack concealed carry handleAccuracy International AICS chassis stockside securing screwsAcer / ASUS / BenQ monitorsAcer Predator X34Acer XR342CKAGCO SimplEbale monitor kit (Massey Ferguson MF 1800)Alpha Series performance display (forklift)Amazon Echo (full size) driversAmazon Echo Dot internalsAmico patient monitor 5-inch shelf with VESA plate
Browse all 388 in Displays, TVs & Mounts →The same screw also fits
Devices whose records share a thread with Samsung TVs (200x200 / 400x400), closest length match first.
- Heavy-duty monitor arms (32in+) also M6 × 12–14 mm
- Hygienic 3-A screw with blue silicone gasket (MOVET) for food processing machinery also M6 × 12 mm
- VESA FDMI displays up to 50kg (standard mount) also M6 × 10 mm
- VESA MIS-F display mount (200x200 and larger) also M6 × 10–14 mm
- Universal full-motion TV mount kits also M6 × 10–14 mm
- VESA MIS-E/F display mount (200mm+) also M6 × 10–14 mm
- M VESA Digital Signage Wallmount also M6 × 10 mm
- VESA MIS-F large display mount also M6 × 10–14 mm
Questions about Samsung TVs (200x200 / 400x400) screws
- What size screw does Samsung TVs (200x200 / 400x400) use?
- M6 × 10–14 mm for samsung support lists M6 among the three sizes used across the lineup.
- How long are the screws in Samsung TVs (200x200 / 400x400)?
- The records range from 10 to 14 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for Samsung TVs (200x200 / 400x400)?
- The sources do not name the drive. For M6, Phillips heads normally take PH3 and Torx heads T30; socket heads take a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.