Feurich Olya EVO digital piano/E-Piano screw size
M6 · 50 mm long
Our records put Feurich Olya EVO digital piano/E-Piano on M6 screws, 50 mm long.
The record covers two metal M6X50 screws used to connect each leg to the pedal bar (4x total).
This entry is marked confirmed and comes from feurich.com.
For reference, M6 is 6 mm across the threads at 1 mm pitch. The imperial size people confuse it with: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
Feurich Olya EVO digital piano/E-Piano screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 50 mm | 1 mm | not stated | not stated | Two metal M6X50 screws used to connect each leg to the pedal bar (4x total) | Confirmed |
Fitment records and sources
Two metal M6X50 screws used to connect each leg to the pedal bar (4x total)
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- Keep long and short screws apart when opening a console; the shell positions differ.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The record states 50 mm. Going longer risks bottoming out or touching parts behind the hole; going shorter loses thread engagement.
- Driver: the source does not name the drive. Standard M6 heads take PH3 for Phillips and T30 for Torx, and a 5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
More in Gaming & Peripherals
Arcade cabinet control panelDell Latitude 3190 / 3190 2-in-1Dell Latitude 3490Dell XPS 13 9315Diebold Nixdorf ATM ESC (Encrypting PIN Pad/keyboard) cross screwDocking station internal boardsGeneric tray-mount mechanical keyboardsHTC Vive controllerInkjet printer / scanner framesKBDfans countersunk standoff kitKeychron K3 / K3 Pro / K3 MaxKeychron K4 Pro and Q1 keyboards
Browse all 30 in Gaming & Peripherals →The same screw also fits
Devices whose records share a thread with Feurich Olya EVO digital piano/E-Piano, closest length match first.
- FJD 3D Excavator Guidance System (GNSS/IMU hardware) also M6 × 50 mm
- Electrolux Professional compact rack-type dishwasher also M6 × 50 mm
- Bed frame side rails also M6 × 50 mm
- Sky-Watcher NEQ6 zero-backlash RA worm mounting kit also M6 × 50 mm
- Wurth Elektronik WA-SSTIE steel spacer stud also M6 × 50 mm
- DIN 912 socket-head cap screw also M6 × 50 mm
- DIN 965 / ISO 7046 countersunk Phillips screw also M6 × 50 mm
- BMW Motorcycles (Various Models) also M6
Questions about Feurich Olya EVO digital piano/E-Piano screws
- What size screw does Feurich Olya EVO digital piano/E-Piano use?
- M6 × 50 mm for two metal M6X50 screws used to connect each leg to the pedal bar (4x total).
- How long are the screws in Feurich Olya EVO digital piano/E-Piano?
- The record gives 50 mm. Measure the original from under the head (overall for a countersunk head) to confirm before ordering.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for Feurich Olya EVO digital piano/E-Piano?
- The sources do not name the drive. For M6, Phillips heads normally take PH3 and Torx heads T30; socket heads take a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.