Roces inline skate frame mounting bolt screw size
M6 · 14 to 21 mm long
The screws used on Roces inline skate frame mounting bolt are M6 in lengths from 14 to 21 mm.
It is listed for frame mounting bolt hex M6, offered in 14mm and 21mm lengths.
This entry is marked confirmed and comes from thisissoul.com.
For reference, M6 is 6 mm across the threads at 1 mm pitch. The imperial size people confuse it with: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6.
Roces inline skate frame mounting bolt screw specifications
One row per fitment record. Head, drive are shown only where the source states them; pitch is the ISO coarse pitch for the thread.
| Thread | Length | Pitch | Head | Drive | Where it goes | Status |
|---|---|---|---|---|---|---|
| M6 | 14–21 mm | 1 mm | not stated | not stated | Frame mounting bolt hex M6, offered in 14mm and 21mm lengths | Confirmed |
Fitment records and sources
Frame mounting bolt hex M6, offered in 14mm and 21mm lengths
pitch 1 mm · tap 5 mm · clearance 6.6 mm · PH3 / Torx T30
How to check the screw before you buy
- Take one original screw out first and measure it before ordering; the record above tells you the thread, the original screw tells you the exact length and head.
- Diameter: across the threads an M6 screw measures about 6 mm with calipers (usually a hair under). If yours measures noticeably more or less, it is a different thread.
- Pitch: 1 mm from one thread crest to the next (10 crests per centimetre). A thread pitch gauge or the pitch-gauge tool settles it in seconds.
- Length: measure from under the head to the tip for pan, button, wafer and cap heads; countersunk (flat) heads are measured overall.
- The records span 14–21 mm, which means different positions take different lengths — match each hole to its own screw.
- Driver: the source does not name the drive. Standard M6 heads take PH3 for Phillips and T30 for Torx, and a 5 mm hex key for socket heads; a bit that fits loosely will cam out and strip the head.
- Tightening: no device-specific torque is published in these records. The site's general figure for M6 is about 7-10 N·m into metal threads and 2.5-4.0 N·m into plastic bosses; snug it up and stop.
Common mix-ups with M6
- Climbing bolt hangers and most ski bindings are M8 and up, outside this database's M1.2-M6 range.
- VESA displays over 50kg move up to M8 x 1.25, which is outside metric M6 hardware - don't force an M6 bolt into a heavy-panel mount.
Buy these screws at TechSpare Warehouse
In stock and shipped from South Carolina. Our black screws are Phillips wafer head (low profile); match the head style and length to the original before you order.
-
M6 x 16mm Black Wafer Head Rack Screws for Rittal DK 7094.100 / 7094.110 / 7094.140 19-inch Rack – 20-Pack Replacement
$8.99Choose size -
M6 x 16mm Black Wafer Head Awning & Box Screws for Thule Awning 326 / 327 / 328, Conduit Box 317 & Xpedition 820 / 821 (50333) – 8-Pack Replacement
$6.99Choose size
More in Other Equipment
2020 aluminium extrusion T-nutsAcer Aspire / SwiftAllen-Bradley PowerFlex 520-series mounting adapter plateAllen-Bradley PowerFlex 750-seriesAllen-Bradley PowerFlex 750-series I/O shield terminationAllen-Bradley PowerFlex 755 IP00 control podAmiga 500 rear/front case screws (Retro32 replacement set)Arduino Uno / MegaASUS / MSI / Gigabyte / ASRock motherboardsBackscatter FLIP3.1 underwater filter frame screws (2x)Backscatter FLIP3.1 underwater flip-frame retaining screwBosch Rexroth swivel-in T-slot nut, slot 8
Browse all 125 in Other Equipment →The same screw also fits
Devices whose records share a thread with Roces inline skate frame mounting bolt, closest length match first.
- Kestrel e400nb wind turbine also M6 × 16 mm
- Kern PFB precision balance internal hardware also M6 × 20 mm
- Powerslide inline skate frame mounting bolt also M6 × 16 mm
- EHEDG hygienic stainless hex head screw with seal washer also M6 × 20 mm
- USD inline skate frame mounting bolt also M6 × 20 mm
- Furniture leveling foot also M6 × 20–21 mm
- Carbide 3D 80mm VFD spindle mount kit also M6 × 20–21 mm
- Gas grill control panel also M6 × 14–20 mm
Questions about Roces inline skate frame mounting bolt screws
- What size screw does Roces inline skate frame mounting bolt use?
- M6 × 14–21 mm for frame mounting bolt hex M6, offered in 14mm and 21mm lengths.
- How long are the screws in Roces inline skate frame mounting bolt?
- The records range from 14 to 21 mm depending on the position, so match each screw to its own hole.
- What is the thread pitch of an M6 screw?
- 1 mm (coarse), which is the standard pitch for M6 machine screws; a 0.75 mm fine pitch exists but is uncommon. The tap drill is 5 mm and the normal clearance hole is 6.6 mm.
- What screwdriver do I need for Roces inline skate frame mounting bolt?
- The sources do not name the drive. For M6, Phillips heads normally take PH3 and Torx heads T30; socket heads take a 5 mm hex key.
- Can I use an imperial screw instead of M6?
- No. Imperial look-alike: 1/4in-20 (6.35 mm) — the tripod/camera thread; visibly larger than M6. Use a true M6 screw so it does not cross-thread or strip the hole.